718590
11
Zoom out
Zoom in
Previous page
1/76
Next page
EN
end.
Take care with the steam; do not aim it at peo-
ple, animals or delicate objects.
Always iron on stable, solid and smooth sur-
faces.
+For very delicate garments, place a cloth be-
tween the iron and the delicate garment to
avoid potential markings from the soleplate..
1 Extend the cord completely and plug it into the
mains. The temperature pilot light will turn on
(11). Place the iron in the vertical position.
2 Select the desired operating temperature ac-
cording to the garment you wish to iron (see
“TEMPERATURE SELECTION (g. 4)”).
3 Select steam ironing (medium or maximum)
or dry ironing as appropriate (see “STEAM
SELECTION”).
4 Hold the iron by the handle, and slide the so-
leplate over the garment to be ironed.
5 After using the iron, set the steam selector
(10) to the closed position and the tempera-
ture selector (9) to position 0.
6 Unplug the power cord from the mains.
7 Empty the water tank (see “EMPTYING THE
WATER TANK”). Wait until the iron is comple-
tely cold and store it in the vertical position in
a safe place.
BEFORE FIRST USE
+Before using it for the rst time, use the
appliance to iron an old cloth or clothing, to
clean the system.
1 Set the temperature selector (9) to the Max
position and wait a few minutes for the iron to
reach the appropriate temperature (the tem-
perature pilot light will go out).
2 Rotate the steam selector (10) until it is in the
completely open position (g. 3): steam will
start to come out of the orices in the solepla-
te.
3 Hold the iron by the handle and slide the sole-
plate over the old towel.
4 When the water tank is empty, no more steam
will be produced. The iron is ready for use.
+Do not worry if the iron gives off a little smoke
when used for the rst time. This will go away
quickly.

1 Turn the temperature selector (9) until it is in
the desired position.
+When changing the position of the temperatu-
re selector (9), to either increase or reduce the
temperature, several minutes must pass befo-
re the iron reaches the selected temperature.
+When the selected temperature is reached,
the pilot light will go out (11).
STEAM SELECTION
To obtain steam, set the temperature selector
(9) between the levels •• and Max, depending
on the garment to be ironed.
The iron has 3 steam positions (dry ironing , me-
dium steam ow or maximum steam ow )
1 When the pilot light (11) goes out, indicating
that the desired temperature has been rea-
ched, rotate the steam selector (10) until the
desired steam ow is obtained (g. 5).

+When you nish ironing, always empty the
water from the tank.
1 Set the steam selector (10) to the closed posi-
tion and the temperature selector (9) to the 0
position.
2 Unplug the plug from the mains.
3 Open the water ller opening (5) and place the
iron face down over the sink, gentlyshaking it
to completely empty the tank.
4 Wait until the iron is completely cold and store
it in the vertical position in a safe place.
IRONING RECOMMENDATIONS
STEAM IRONING
For professional ironing results, we recom-
mend you steam iron garments rst and then
dry iron them.
SUPERSTEAM
+If you want more steam while ironing, press
the button (8) two or three times, aim the su-
persteam at the desired area of the garment
and pass the iron soleplate over it to dry it.
Thus is useful for eliminating wrinkles.
+The supersteam may not be released on
the rst occasions. This is normal. Press the
push-button a couple of times. Once the su-
persteam circuit has been primed, the jet of
steam will be released
We recommend pressing the control at 5-se-
cond intervals.
VERTICAL STEAM
+This allows you to remove creases from deli-
cate garments without having to put them on
the ironing board: jackets, overcoats, curtains,
PV2013_plancha.indd 11 15/7/16 15:59
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solac PV2013 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solac PV2013 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 5,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info