Manual Solac PV2013 (page 10 of 76) (English, German, Dutch, French, Italian, Polish, Portuguese, Spanish)

718590

Zoom out

Zoom in

1/76

or tangled cables increase the risk of electric

shock.

• Do not use the appliance if the cable or plug

is damaged.

• If any of the appliance casings breaks, im-

mediately disconnect the appliance from the

mains to prevent the possibility of an electric

shock.

• Do not touch metal parts or the body when it is

operating, as it may cause serious burns.

• Fully unroll the appliance’s power cable before

each use.

• Disconnect the appliance from the mains when

not in use and before undertaking any cleaning

task.

• Do not store or transport the appliance if it is

still hot.

• Turn the thermostat control to the minimum

(MIN) setting. This does not mean that the iron

is switched off permanently.

• Any misuse or failure to follow the instructions

for use renders the guarantee and the manu-

facturer’s liability null and void.

• IMPORTANT: When you want to dispose

of the appliance, NEVER throw it in the rubbi-

sh. Instead, go to your closest CLEAN POINT

or waste collection centre for subsequent treat-

ment. In this way, you will be contributing to

looking after the environment.

• Before disposing of your used appliance, you

should make it visibly unserviceable and have

it disposed of according to current national le-

gislation.

• Ask your Distributor, Town Council or Local Au-

thority for detailed information.

MAIN COMPONENTS

1 Main body

2 Power cord

3 Metal soleplate

4 Spray outlet

5 Water ller opening

6 Water tank

7 Spray button

8 Supersteam button

9 Temperature selector

10 Steam selector

11 Temperature pilot light

12 Self clean

BEFORE STARTING TO IRON

Due to the high levels of mains water hard-

ness in most areas, Solac recommends that

you always use demineralised water for iro-

ning. In this way, you will guarantee that your

iron remains in optimal condition for a longer

period of time.

Do not use decalcifying agents or descaling

products in the water tank. Do not use scen-

ted water or ironing water either. These pro-

ducts damage the interior of the steam gene-

ration system.

1 With the iron unplugged from the mains, rota-

te the steam selector (10) to the closed posi-

tion (g. 2).

2 Open the water ller opening (5). Fill the wa-

ter tank without exceeding the maximum le-

vel, using the water beaker provided (12) and

keeping the iron in the vertical position (Fig.

1). When the tank is full, close the cap..

+When lling the tank, make sure that the wa-

ter does not overow from the water ller ope-

ning.

3 Check whether the garment to be ironed has a

label indicating the ironing tempera.

+We recommend you classify the garments ac-

cording to their required ironing temperature

and begin with the garments ironed on the

lowest temperature(•)

SYNTHETIC FIBRES, minimum temperature (•)

SILK, WOOL, medium temperature (••)

COTTON, high temperature (•••)

LINEN, MAX temperature

NOTE: Ironing delicate garments at a tempe-

rature higher than necessary spoils the fabric

and causes burnt residue to stick to the sole-

plate.

If you have any doubts about the temperature

to use for a given garment, perform a test on

a part, which will not be visible, beginning with

the lowest temperature settings

USE

+This appliance has been designed exclusively

for ironing clothes. Do not use it for any other

purpose.

+Completely remove all the elements use for

transportation and packaging.

If the appliance is hot, handle it with care and

do not touch the metal soleplate..

Never leave the iron in a horizontal position

when the soleplate is hot. Rest it on its rear

PV2013_plancha.indd 10 15/7/16 15:59

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Solac PV2013 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 5,42 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Solac PV2013 Manual

Product: