488723

Solac PV2010 Manual

13
Zoom out
Zoom in
Previous page
1/86
Next page
USE 13
en
, If you have any doubts about the temperature to use for a given garment, perform a
test on a part, which will not be visible, beginning with the lowest temperature settings.
USE
) This appliance has been designed exclusively for ironing clothes. Do not use it for any
other purpose.
) Completely remove all the elements use for transportation and packaging.
n If the appliance is hot, handle it with care and do not touch the metal soleplate.
n
Never leave the iron in a horizontal position when the soleplate is hot. Rest it on its rear end.
n Take care with the steam; do not aim it at people, animals or delicate objects.
n Always iron on stable, solid and smooth surfaces.
) For very delicate garments, place a cloth between the iron and the delicate garment to
avoid potential markings from the soleplate.
1 Extend the cord completely and plug it into the mains. The temperature pilot light will
turn on (11). Place the iron in the vertical position.
2 Select the desired operating temperature according to the garment you wish to iron
(see “TEMPERATURE SELECTION (fig. 4)”).
3 Select steam ironing (medium or maximum ) or dry ironing , as appropriate
(see “STEAM SELECTION”).
4 Hold the iron by the handle, and slide the soleplate over the garment to be ironed.
5 After using the iron, set the steam selector (10) to the closed position and the
temperature selector (9) to position 0.
6 Unplug the power cord from the mains.
7 Empty the water tank (see “EMPTYING THE WATER TANK”).
Wait until the iron is completely cold and store it in the vertical position in a safe place.
BEFORE FIRST USE
) Before using it for the first time, use the appliance to iron an old cloth or clothing, to
clean the system.
1 Set the temperature selector (9) to the Max position and wait a few minutes for the iron
to reach the appropriate temperature (the temperature pilot light will go out).
2 Rotate the steam selector (10) until it is in the completely open position (fig. 3):
steam will start to come out of the orifices in the soleplate.
3 Hold the iron by the handle and slide the soleplate over the old towel.
4 When the water tank is empty, no more steam will be produced. The iron is ready for use.
) Do not worry if the iron gives off a little smoke when used for the first time. This will go
away quickly.
TEMPERATURE SELECTION (fig. 4)
1 Turn the temperature selector (9) until it is in the desired position.
) When changing the position of the temperature selector (9), to either increase or
reduce the temperature, several minutes must pass before the iron reaches the
selected temperature.
) When the selected temperature is reached, the pilot light will go out (11).
STEAM SELECTION
, To obtain steam, set the temperature selector (9) between the levels •• and Max,
depending on the garment to be ironed.
The iron has 3 steam positions (dry ironing , medium steam flow or maximum steam flow
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solac PV2010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solac PV2010 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info