488723

Solac PV2010 Manual

12
Zoom out
Zoom in
Previous page
1/86
Next page
12
MAIN COMPONENTS
• Always store the iron in a vertical position on its stand, resting it on a stable surface.
• The iron must not be used if it has been dropped, or if there is any crack or leak in the
water tank. If you observe any of these problems, take the iron to a T.A.S. approved by
the manufacturer.
• Do not leave the appliance unattended when switched on.
• The soleplate can get very hot when the appliance is in use. During operation, do not
touch the soleplate and only hold the iron by its handle, and ensure the cord does not
come into contact with the soleplate
q
CAUTION! When you want to dispose of the appliance, NEVER throw it in the
rubbish bin. Take it to the CLEAN POINT or waste collection centre closest to your
home for processing. You will thus be helping to take care of the environment.
MAIN COMPONENTS
BEFORE STARTING TO IRON
, Always make sure the soleplate protector has been removed before starting to
iron.
, Due to the high levels of mains water hardness in most areas, Solac recommends that
you always use demineralised water for ironing. In this way, you will guarantee that
your iron remains in optimal condition for a longer period of time.
, If, for any reason, you cannot find demineralised water, please ensure you use water
with a low mineral content (soft water), or filter tap water using a water filter.
, Do not use decalcifying agents or descaling products in the water tank. Do not
use scented water or ironing water either. These products damage the interior of
the steam generation system.
1 With the iron unplugged from the mains, rotate the steam selector (10) to the closed
position (fig. 2).
2 Open the water filler opening (5). Fill the water tank without exceeding the maximum
level, using the water beaker provided (12) and keeping the iron in the vertical position
(Fig. 1). When the tank is full, close the cap.
) When filling the tank, make sure that the water does not overflow from the water filler
opening.
3 Check whether the garment to be ironed has a label indicating the ironing temperature.
) We recommend you classify the garments according to their required ironing
temperature and begin with the garments ironed on the lowest temperature (•).
, NOTE: Ironing delicate garments at a temperature higher than necessary spoils the
fabric and causes burnt residue to stick to the soleplate.
1 Main body
2Power cord
3 Metal soleplate
4 Spray outlet
5 Water filler opening
6 Water tank
7 Spray button
8 Supersteam button
9 Temperature selector
10 Steam/Self-clean selector
11 Temperature pilot light
12* Water beaker (only model PV2210)
SYNTHETIC FIBRES, minimum temperature (•)
SILK, WOOL, medium temperature (••)
COTTON, high temperature (•••)
LINEN, MAX temperature
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solac PV2010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solac PV2010 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info