507551
13
Zoom out
Zoom in
Previous page
1/78
Next page
14
IRONING RECOMMENDATIONS
TEMPERATURE SELECTION (fig. 4)
1 Turn the temperature selector (7) to the desired position.
) When changing the position of the temperature selector (7), either to increase or
decrease the temperature, the iron will take several minutes to reach the set
temperature.
) Once the temperature has been reached the heating light turns off (9).
STEAM SELECTION
, To obtain steam the temperature selector (7) must be situated between the levels • •
and max, depending on the garment to be ironed.
The soleplate has 2 steam positions (dry ironing ; or ironing with steam )
1 When the pilot (9) goes off, indicating that it has reached the desired temperature, set
the steam switch (8) to the ironing with steam position if desired.
EMPTYING THE WATER TANK
) After ironing always empty the water tank.
1 Set the steam selector (8) to the closed position and the temperature selector (7)
to the min position.
2 Unplug the cord from the power supply.
3 Open the water filling inlet (4) and place the iron upside down over the sink, shaking
gently to completely empty out all the water.
4 Wait until the iron is completely cool and store upright in a safe place.
IRONING RECOMMENDATIONS
IRONING WITH STEAM
, To obtain a professional finish, we recommend ironing with steam first and then dry
ironing so clothes are not damp.
STEAM BOOSTER (Fig. 5)
) When using steam to iron and more steam is required, press button (6) two or three
times and direct the steam booster to the desired area of the garment, and then pass
the sole plate to dry. This function is useful for eliminating creases.
We recommend pressing the knob at 5 second intervals.
VERTICAL STEAM (Fig. 6)
) Allows creases to be removed from delicate fabrics without the need to use the ironing
board: jackets, coats, curtains, etc.
1 Fill the water tank as described in the section "BEFORE YOU START IRONING."
2 Place the garment on a hanger, away from other garments, people, items, animals, etc.
n Do not project the steam at a garment hanging in a closet or if someone is wearing it.
3 Set the steam selector (8) to the closed position and the temperature selector (7)
to the max position.
4 Move the iron towards the garment vertically (between 15 and 30 cm) and press the
steam button (6) only once. Do not hold the iron over the garment too long as this may
cause damage.
5 Wait a few seconds before pressing the button (6) again, to avoid damaging the
garment. Most creases can be removed with three shots of steam.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solac PV1610 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solac PV1610 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 0,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info