507551

Solac PV1610 Manual

12
Zoom out
Zoom in
Previous page
1/78
Next page
USE 13
en
) We recommend that clothes are sorted according to the temperature required for
ironing, starting with the garments that require the lowest temperature (min).
, N.B.: Ironing delicate garments with a higher temperature than necessary will damage
the fabric and cause the burnt residue to stick to the sole plate.
, If you have any doubts about the temperature to use on a particular garment, test a part
of the garment that is not visible, starting first with the lowest temperatures.
USE
) This appliance has been designed exclusively for ironing clothes. Do not use it for other
use.
) Completely remove all elements used for transport and packaging.
n If the unit is hot, handle with caution and avoid touching the metal sole plate.
n Never leave the iron in the horizontal position when the soleplate is hot. It must rest on
its rear part.
n Be careful with steam, do not direct steam towards people, animals or delicate objects.
n Always iron on a stable, firm and smooth surface.
) For very delicate garments, place a cloth between the iron and the delicate garment, to
avoid marks on the soleplate.
1 Extend the cord completely and plug the socket into the power supply. The warming
light will (9) come on. Set the iron upright.
2 Select the desired working temperature according to the garment being ironed (see
"TEMPERATURE SELECTION (fig. 4)”).
3 Select iron with steam ; or without steam , as convenient (see “STEAM
SELECTION").
4 Take the iron and slide the sole plate over the fabric to be ironed.
5 When you finish using the iron, move the steam (8) to the closed position and the
temperature selector (7) in the min position.
6 Disconnect the connection cord from the power supply
7 Empty the water tank (see "EMPTYING THE WATER TANK”).
Wait until the iron is completely cool and store upright in a safe place.
BEFORE USING FOR THE FIRST TIME
) Before using for the first time, use the appliance to iron a cloth or old garment, to clean
the system.
1 Set the temperature selector (7) to the max position and wait a few minutes until the
iron reaches the appropriate temperature (heating light will switch off).
2 Move the steam selector (8) to its fully opened position .
The steam will start to come out through the soleplate holes.
3 Take the iron by the handle and slide the sole over an old cloth.
4 When the water in the tank finishes, the steam will stop. The iron is then ready for use.
) Do not worry if the iron gives off a little smoke when using for the first time. This will
quickly disappear.
SYNTHETIC FIBRES, minimum temperature (min/•)
SILK, WOOL, medium temperature (••)
COTTON, high temperature (•••)
LINEN, MAX. temperature
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solac PV1610 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solac PV1610 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 0,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info