610635
18
Zoom out
Zoom in
Previous page
1/62
Next page
18 Keypad Lock
i The flashing symbol is the one pending confirmation.
Z You will need to repeat this operation for the 24 hours of the day.
4 Press the PROG button (9) to move on to the next day.
5 Press the PROG button (9) once the programming for the seven days of
the week is complete, if you would like to start running the saved
operating schedule.
i The heater will then start to operate according to the saved schedule.
The heater must be left plugged into the mains with the programming
mode selected, for the selected programme schedule to run.
Z Check that the heater starts to operate on the correct day at the correct
time. If not, you will need to adjust the day and time.
6 To exit to another operating mode, press the PROG button (9) again.
7 Keypad Lock
Z The user can prevent changes to the saved programming by locking the
control keypad. This function is very useful in public buildings or to
prevent children’s access.
1 Press the “+” and “-” buttons simultaneously for 3 seconds.
i The keypad will be disabled and the screen will show the locked symbol
(A).
2 Repeat the same operation to unlock.
i The keypad will be activated and the locked symbol will disappear from
the screen.
i The control panel will automatically lock after ten minutes, if none of its
buttons are pressed.
8 Cleaning and maintenance
Make sure the emitter is not connected to the mains, and let its surface
cool if you were using it previously.
Use a damp, soft cloth to clean the emitter. Do not use solvents or
abrasive detergents. When necessary, use a vacuum cleaner to remove
the dust from the emitter.
ET8934_36_38_40_42.book Page 18 Thursday, July 9, 2009 9:22 AM
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solac ET8938 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solac ET8938 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish, Finnish as an attachment in your email.

The manual is 3,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info