610635

Solac ET8938 Manual

16
Zoom out
Zoom in
Previous page
1/62
Next page
16 Programming
2 Press the Economy button (14) if you want to select the Economy mode.
i The Economy icon (X) will be displayed.
3 Press the Anti-frost button (15) if you want to select the Anti-frost mode.
i The Anti-frost icon (U) will be displayed.
4 Press and hold down the PROG button (9) for two seconds, if you want
the heater to operate according to the programmed weekly schedule (fig.
12).
i If the user does not reset the heater, it will operate according to the
factory default schedule setting.
5 Press the PROG button (9) once to exit this programming mode and
return to the last selected mode (comfort, economy or anti-frost).
Setting the Temperature in Comfort, Economy and Anti-Frost Modes
1 Select the required operating mode: comfort, economy or anti-frost using
the corresponding button (13), (14) or (15).
2 Press the “+” or “-” button once to display the programmed temperature.
3 Press the “+” or “-” buttons again to increase or decrease the
temperature as desired for each mode.
i The temperature changes by 0.5º C every time you press a key.
i The degrees centigrade icon will flash while the temperature setting is
being changed and will continue to flash until you have completed the
temperature selection.
4 After a few seconds without any button being pressed, the selected
temperature will automatically be saved.
• Temperature range in comfort mode: 5 - 35º C
• Temperature range in economy mode: 5 – 31.5º C (the maximum
temperature for this range must always be 3.5ºC below the temperature
set for comfort mode).
• Temperature range in anti-frost mode: 5 - 15º C
6 Programming
1 Press the PROG button (9) once to enter the programming mode.
Setting the Clock Time (fig. 13)
i To ensure that the heater starts operating at the expected time, the
current time must be saved on the clock.
ET8934_36_38_40_42.book Page 16 Thursday, July 9, 2009 9:22 AM
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solac ET8938 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solac ET8938 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish, Finnish as an attachment in your email.

The manual is 3,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info