Manual Solac ET8936 (page 13 of 62) (English, German, Dutch, French, Italian, Polish, Spanish, Finnish)

610634

Zoom out

Zoom in

1/62

Main Components

The appliance should not be installed in places where there is a risk

of it being splashed with water, such as from bathtubs, sinks,

showers, swimming pools, etc.

• Do not operate the appliance with the cable wound up.

• If the power cable is damaged, do not switch on the appliance. This

cable should only be replaced by the Technical Assistance Service in

order to prevent any risks.

• The appliance must be installed so that the switches, thermostat and

mobile power socket cannot be touched directly or indirectly by a person

in the bath or shower.

• To avoid the new smell of the appliance when using it for the first time,

switch on the emitter and leave it working for 2 hours at the highest

temperature.

Caution! When you wish to dispose of the appliance, NEVER throw it

in the rubbish. Instead, take it to your nearest clean point or waste

collection point, where it will receive subsequent treatment. You will

thus be helping to take care of the environment.

2 Main Components

1 Body of the heater

2 Top wall mounts (2 units)

3 Bottom wall mount

4 Screws + wall plugs for mounting (5 units + 5 units); M5x20 screws

for bottom wall mount

5 Heater fastening holes

6 Feet (ACCESSORY - NOT INCLUDED)

Displays and Controls

7 On/Off switch

8 LCD screen

9 PROG programming pushbutton

10 + Pushbutton

11 - Pushbutton

12 Start button

13 Comfort mode button

14 Economy mode button

15 Anti-frost mode button

ET8934_36_38_40_42.book Page 13 Thursday, July 9, 2009 9:22 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Solac ET8936 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish, Finnish as an attachment in your email.

The manual is 3,13 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Solac ET8936 Manual

Product: