610634

Solac ET8936 Manual

14
Zoom out
Zoom in
Previous page
1/62
Next page
14 Installation Instructions
3 Installation Instructions
Z Whenever possible, install the heater on a wall beneath a window, but
never in a ventilation area.
Z Always observe the minimum safety distance between walls or
obstacles and the heater during installation (fig. 1).
Wall Mounting
1 Place the heater against the wall. Mark the installation position of the
heater using two pieces of masking tape. (fig. 2).
2 Mark the positions of the 4 holes to be drilled for fixing the top mounts
(fig. 3).
3 Drill the 4 holes and insert the wall plugs provided (fig. 4).
i Screw hole sizes: 6 mm in diameter x 30 mm in depth
4 Fix the top mounts (2) to the wall using the screws provided (fig. 5).
5 Fix the bottom mount (3) to the heater, screwing the supplied screw
(M5x20) through the circular hole.
i Fix the mount (3) on the edge of the central groove (fig. 6).
6 Suspend the heater from the top mounts (2). To do so, insert the
fastening pins of the top mounts into the fastening holes of the heater (5)
(fig. 7).
Z Ensure that the heater is horizontal.
7 With the heater in place, mark the position of the hole to be drilled for
fixing the bottom mount.
8 Drill the hole into the wall and insert the supplied wall plug (if necessary,
remove the heater so that you can work without obstruction, replacing it
when you have finished).
i Screw hole sizes: 6 mm in diameter x 30 mm in depth
9 Fix the bottom mount (3) to the wall using the screws provided (fig. 8).
Z To mount on a plastered brick wall, use the screws and wall plugs
provided. For other surfaces, consult the specialist salesperson.
Installing the Feet (Accessory - NOT included)
If you would like your heater to be free-standing, instead of wall-mounted (fig. 9):
1 Turn the heater over so that the base faces upwards.
2 Place the feet (6) on the support plates.
ET8934_36_38_40_42.book Page 14 Thursday, July 9, 2009 9:22 AM
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solac ET8936 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solac ET8936 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish, Finnish as an attachment in your email.

The manual is 3,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info