switch It is NOT necessary to drain
the water tank.
jackets, coats, curtains, suede garments, etc.
place the iron in the vertical position and
the steam is drier and, although the same flow is maintained, it will be
harder for you to see.
be refilled. If the tank is not filled, pump will stop automatically within 1 minute to prevent
damaging it.
, in the vertical position as
shown in figure
switch
and start ironing again.
which retains the limy substances in the water, preventing these from reaching the steam chamber in the
resin so that the CVG is kept in optimum condition. If you want to replace the resin, we recommend you
to do it every 6 months. Changing the resin does not mean that you may overlook the advice about water
directions in the drawing, pressing the part inwards at the same time, until reaching the padlock closed
position