Manual Solac CP7305 (page 13 of 73) (English, German, Dutch, French, Italian, Polish, Portuguese, Spanish)

610549

Zoom out

Zoom in

1/73

3. TOP

• We advise using the longest position, number 13 (22 mm approx.).

• Begin cutting from the FRONT of the head and gradually move towards the

BACK (Fig.3).

• Remember that it is better to leave the hair a bit longer in the first haircuts

until you get used to the length of each position.

• Lift the lock of hair to be cut using the comb Fig.1 (8) or your fingers and

cut above them. Always start from the front backwards, gradually cutting

the hair shorter. Comb it frequently to detect any irregularities of length and

to remove hair you have already cut.

4. FINISHING TOUCH

• To achieve a straight line at the sideburns and around the ears, remove the

comb accessory Fig.1 (1), hold the clipper at a right angle to the head,

upside down with the blades touching the skin, and move it downwards.

• We remind you that using the hair clipper without the comb accessory Fig.1

(1) will crop the hair.

FOR LONG HAIR

• Remove the comb accessory from the clipper, comb and untangle the hair.

• Separate the hair with a straight line across the head from ear to ear and

hold the front part with clips so that it does not get in your way (Fig.4).

• Split the hair at the back of the head into three horizontal sections. Use clips

to hold the upper layers (Fig.5).

• Begin by cutting the bottom layer of hair, marking the desired length with

the comb Fig.1 (8) and cut it using the hair clipper, always below the comb.

Once you have cut this layer, do the same with the other two. To cut the

front of the hair, part it in the usual place and repeat the same operation as

with the back. Remember that the hair should be well combed at all times.

CUTTING THE FRINGE

• Wet the fringe and part it horizontally at the top of the head to mark the

limit of the area to be cut.

• Comb it downwards and split it into 2 or 3 horizontal layers.

• Use clips to hold the upper layer or layers.

• Comb the bottom layer and hold it with your fingers, leaving the length you

want to cut below them.

• Trim off the excess part, always below the fingers. Do the same with the

other layers.

TRIMMING BEARDS AND MOUSTACHES

• Set the comb accessory to the desired position. We recommend that you

start off with one of the longest positions (position 12-13) and change it as

required.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Solac CP7305 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 0,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Solac CP7305 Manual

Product: