799500

Solac CE4520 Manual

12
Zoom out
Zoom in
Previous page
1/71
Next page
STEAMER PIPE CLEANING
ATTENTION! All of the steamer components can be-
come very hot.
It is advisable to clean the steamer pipe after genera-
ting steam and before switching o󰀨 the machine to pre-
vent a build-up of dirt.
To do this, take the sleeve o󰀨 the steamer pipe.
Place a glass containing with a little water, under the
pipe and submerge the pipe in the water.
Follow the instructions in the “Hot Water” section to
make hot water come out through the pipe.
Use a cloth to dry the pipe and put the sleeve back on.
If no steam comes out, dry milk may be blocking the
outlet. In which case, carefully use a needle to unclog
the tip of the steamer pipe.
Once clean, rinse under running tap water and reas-
semble it. Generate some more steam.
HOW TO DEAL WITH LIME
SCALE INCRUSTATIONS:
For the appliance to work correctly it should be kept free
of limescale or magnesium deposits caused by using
hard water.
To prevent this kind of problem, we recommend the use
of water with low lime or magnesium mineralisation.
The co󰀨ee maker tells you when descaling is needed
by beeping and the three lights switch on without as-
hing.
When this happens, ll the tank with 1L of water and
add a descaling agent (citric acid, descaler...)
Access the programming menu as described earlier in
the manual.
Place a large container (enough to hold 1L water) under
the steamer pipe.
Open the steam control to the MAX position.
Press the steam heating button again and the machine
will begin the descaling process. This process takes
about 5 minutes.
A specic anti-lime scale product should be used on this
kind of product.
NOTE: Should you also want to clean the entire co󰀨ee
system, you can alternate the ow of water by using the
steam control.
NOTE: Home-made solutions, such as the use of vine-
gar, are not recommended for de-scaling this appliance.
Once the operation has nished, rell the tank with
clean water and go through the process again, but
without descaling agent, to eliminate any remains left
inside the machine.
Once nished, clean the water tank and the machine is
now ready for use.
FAULTS AND REPAIR
Take the appliance to an authorised technical support
service if problems arise. Do not try to dismantle or re-
pair it, as this may be dangerous.
Lit button warnings
Operation LED indicators
On/O󰀨 The machine is
preparing itself.
Start of the
co󰀨ee brewing
function
Flashing: Pre-heating.
Steady: Ready to make
co󰀨ee.
Start of the
steam function
Flashing: Pre-heating.
Steady: Ready for steam
Open steam
control
Flashing: Reminder to
close the steam control
Thermoblock
too hot.
Steady: It needs to cool
down.
Descale
warning.
The 3 lights light up.
Proceed with descaling.
NTC fault. The 3 lights ash
simultaneously.
EN
Downloaded by: pd-oliana on 12-08-2022 14:11 CEST
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solac CE4520 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solac CE4520 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1.11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info