Manual Solac CE4520 (page 9 of 71) (English, German, Dutch, French, Italian, Polish, Portuguese, Spanish)

799500

Zoom out

Zoom in

1/71

USE AND CARE:

Do not use the appliance if its accessories are not pro-

perly tted.

Do not switch the appliance on without water.

Do not use the appliance if the ON/OFF switch does

not work.

Do not move the appliance while in use.

Respect the MAX and MIN levels.

Disconnect the appliance from the mains when not in

use and before undertaking any cleaning task.

Store this appliance out of reach of children and/or tho-

se with reduced physical, sensorial or mental abilities or

who are unfamiliar with its use.

Do not put the appliance away if it is still hot.

Only use water with the appliance.

Never leave the appliance connected and unattended if

not in use. This also saves energy and prolongs the life

of the appliance.

Do not remove the lter holder when co󰀨ee is being

made, as at that time it is under pressure.

DESCRIPTION

A Cup warming plate

B Steam/water control

C Steam heating button

D 2-co󰀨ee button

E 1-co󰀨ee button

F Drip tray

G Tank lid

H Water tank

I Steamer pipe

J Start/stop button

K Filter for single measure

L Filter for double measure

M Filter for capsules *

N Filter holder

O Measuring spoon with compactor

P Pressure gauge

(*) Only available on Taste Slim ProCAP model (CE4523)

If your model of appliance does not have the accessories described above, they can purchased separately from the Technical Assistance Service.

Dear customer,

Thank you for deciding to purchase a Solac brand pro-

duct.

Thanks to its technology, design and operation and the

fact that it exceeds the strictest quality standards, a fully

satisfactory use and long product life can be assured.

Read these instructions carefully before switching on

the appliance and keep them for future reference. Fai-

lure to follow and observe these instructions may result

in an accident. Failure to follow and observe these ins-

tructions may result in an accident.

INSTRUCTIONS

BEFORE USE:

Make sure that all the product’s packaging material

has been removed.

When using this product for the rst time, it is advisa-

ble to test it with just water.

Before using the product for the rst time, clean the

parts that will come into contact with food in the man-

ner described in the cleaning section.

Before switching the machine on, check that there

is nothing pressing the buttons and that the steam

controller is closed.

FILLING WITH WATER:

The tank must be lled with water before turning the

appliance on.

Remove the tank from the appliance.

Open the lid

Fill the tank with cold water.

Fill the container, respecting the MAX level.

Close the lid.

Replace the tank in its housing, ensuring that it is well

tted.

PRESSURE INDICATOR

The pressure gauge (P) indicates whether the pressu-

re is optimal for the task in hand, when the pointer is in

the OPTIMAL PRESSURE region.

PRIMING THE CIRCUIT

This simple operation ensures optimum dispensing

and has to be performed:

• When rst starting:

• When the machine has not been used for a long

time (1 or 2 weeks)

• After producing steam

• When the tank has run out of water.

Fill the tank with water, making sure not to exceed the

“MAX” level marker.

Connect the appliance to the mains.

Set the On/O󰀨 switch (J) to the On position. The pilot

light will light up

For this operation it is not necessary to wait for the

machine to heat up

Without tting the lter holder, (or with the lter holder

tted, but without co󰀨ee), place a container below the

steam tube (I)

Open the steam control (B) by turning it anti-clockwise.

The pump will start to operate, taking water from the

tank.

Water will come out through the steam pipe. Wait until

approximately one cupful has come out.

To nish the operation, close the steam control (B) by

turning it clockwise.

This will complete the priming operation.

ENENGLISH

Downloaded by: pd-oliana on 12-08-2022 14:11 CEST

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Solac CE4520 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1.11 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Solac CE4520 Manual

Product: