799490

Solac CE4502 Manual

9
Zoom out
Zoom in
Previous page
1/64
Next page
- Without tting the lter holder (J) (or with the
lter holder tted, but without coffee), place a
recipient under the steamer tube (I) outlet.
- Open the Steam knob (R) turning anticlock-
wise.
- Turn the selector knob (H) to the coffee/water
position (G1).
- Water will exit through the steam outlet. Wait
until approximately one cupful has exited.
- To nish serving, return the function selector
(H) to the center position (G0) and close steam
knob (R) turning clockwise.
- This will complete the priming operation.
FILLING WITH WATER:
- The tank must be lled with water before turn-
ing the appliance on.
- Remove the water tank.
- Fill the tank taking care to observe the MAX
level.
- Replace the tank in its housing, ensuring that it
is well tted and silicone tubes well introduced
on water tank.
FILLING COFFEE:
- Remove the lter holder (J).
- Position the selected ground coffee lter (L or
M) in the lter holder.
- Filter L (smaller one) can be used either for
ground coffee or paper pods.
- We recommend using natural toast coffee,
as using some roasted coffee may affect the
operation of the machine.
- Fill the chosen removable lter (1 or 2 cups)
with ground coffee (6-7 gr. per cup to be pre-
pared).
- Using measuring spoon (I) for 1 coffee, put 1
spoonful.
- For POD (single dose of paper), use the same
1-coffee lter, placing the well-placed mode in
the lter.
- For 2 coffees, use 2 cups lter and put in 2
spoonful.
- Next lightly press down the ground coffee with
the back of the spoon.
- Before tting the lter holder in the coffee-mak-
er assembly, turn the ladle-holder backwards.
- Fit the lter holder in the appliance once more.
- Position the lter holder in the coffee assem-
bly by inserting the assembly downwards and
turning it anticlockwise, from left to right, until
it locks.
USE TIPS:
- 1. The lter holder must be well placed. The
correct position is with the handle slightly past
the center (Fig1). See the position of the coffee
outlet at the bottom to get an idea of the correct
position: You will notice that the coffee output is
not perpendicular to the handle (to get an idea
of the position)
- 2. The lter holder must be closed with the
machine hot. If the machine is cold, it could
happen that the closure is not correct and there
is a small loss above the lter holder.
- 3. Use the appropriate amount of coffee (Fig 2),
to be able to properly close the lter holder
- 4. Use medium-ne coffee grinding size (Fig 3).
Excessively ne can make it difcult for coffee
to escape.
USE
- Before connecting the machine, check that the
steam control (R) is closed.
- Plug the appliance into the mains.
- Start the device by pressing the ON / OFF
button F, on the back of the machine.
- The D light will illuminate, indicating that the
machine is ON and heating.
- Wait until the E indicator will light, indicating
that the correct temperature has been reached.
- Fill the lter-holder with coffee.
- Place one or two preheated cups at the outlet
of the lter holder.
- Turn the selector knob (H) to the coffee/water
position (G1)
- The unit will start with the brewing.
- When you have obtained the desired amount
of espresso coffee (short or long), return the
function selector to the center position (G0).
- Finishing the supply wait a few seconds, re-
move the cups with the coffee.
- Remove the lter holder and empty it of the
grounds.
- Wash the lter holder with running water and
dry thoroughly.
- Check that the removable lter is perfectly
placed in the lter holder.
- Reattach the lter holder to the appliance.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solac CE4502 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solac CE4502 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1.41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info