Manual Solac CE4497 (page 11 of 84) (English, German, Dutch, French, Italian, Polish, Portuguese, Spanish)

798567

Zoom out

Zoom in

1/84

- That Icon (4) will remain lit, xed indicating that

the water has reached the necessary tempera-

ture for generating steam.

- Place a recipient under the steam tube.

- Open Steam knob (R) anticlockwise.

- Steam only will begin to exit.

- When you have enough, close the control and

remove the recipient.

MPORTANT

- When you nish doing steam, you must re-

ll the water used to make steam, because the

temperature of making steam, is very high,

and reduced the water in the boiler. While you

rell the boiler, at same time, you get the right

temperature (lower) for making coffee.

- To do it, do as per “Getting Hot water”

GETTING HOT WATER:

- Put the device in ON situation, pressing the

knob Espresso ON/OFF (F).

- The heating icon (2) will blink on the display

(D).

- Blinking means it has started to heat up.

- When (2) remains xed, it indicates that it has

reached the appropriate temperature.

- Place a container under the nozzle.

- Open the steam control (R), turning him to the

left, counterclockwise.

- The hot water began to come out of the vapor-

izer.

- Once obtained the desired amount of hot water.

- Close The turning knob (R) to the right, clock-

wise.

- The machine will stop supplying water.

FOR DRIP COFFEE

- Make sure there is enough water in the tank.

- Fill the Permanent Filter (O) for drip coffee,

using a measuring spoon.

- Use a maximum of 2 spoonful of coffee, not

too ne.

- Properly place the Drip Filter Holder (N) with

the Drip Filter (O) in the machine.

- Place the thermos jug (S) under the coffee

spout.

- Press the Drip Coffee Switch (E).

- On Display (D), the Drip Coffee Icon will light

up (7).

- The machine will start making coffee.

- When you have nished making coffee, the

machine will emit a warning sound 3 times and

then the machine will automatically turn off.

- You can take out the thermos jug (S) when the

coffee has stopped coming out.

AUTO-OFF FEATURE:

- The SOLAC machines are designed to save

energy

- To that end, after some minutes from the last

operation, the unit switches to energy saving

mode

- To return to normal operation you should just

Switch OFF and Switch ON the connect button

(F)

ONCE YOU HAVE FINISHED USING THE

APPLIANCE:

- Turn the appliance off, using the on/off switch

(F) to OFF

- Unplug the appliance to the mains.

- Remove the water from the water tank.

- Clean the appliance

CLEANING

BASIC CLEANING

- Disconnect the appliance from the mains and

let it cool before undertaking any cleaning task.

- Clean the equipment with a damp cloth with a

few drops of washing-up liquid and then dry.

- Do not use solvents, or products with an acid or

base pH such as bleach, or abrasive products,

for cleaning the appliance.

- Do not let water or any other liquid get into the

air vents to avoid damage to the inner parts of

the appliance.

- Neither parts of this appliance are suitable for

cleaning in the dishwasher.

- After washing, dry all the parts before tting

them together and storing.

CLEANING THE FROTHING WAND

- CAUTION! The frothing wand, and frothing

sleeve may be VERY HOT.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Solac CE4497 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 2.29 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Solac CE4497 Manual

Product: