798567

Solac CE4497 Manual

10
Zoom out
Zoom in
Previous page
1/84
Next page
- Replace the tank in its housing, ensuring that it
is well tted.
- Close the lid.
FILLING OF COFFEE (FOR ESPRESSO):
- Remove the Espresso lter holder (J).
- Position the ground chosen coffee lter (L ó M)
in the lter holder
- We recommend using natural toast coffee, as
using roasted coffee may affect the operation
of the machine.
- Fill the removable lter with ground coffee (6 to
7 gr per cup to be prepared).
- If you wish to make 1 coffee, use 1 lter coffee,
ll the ladle (1 spoonful) and take the capacity
of the measuring spoon as the measure for one
coffee.
- For 2 coffees, use 2 cups lter (M), and put in
2 spoonfuls.
- Next lightly press down the ground coffee with
the back of the spoon.
- Fit the lter holder in the appliance once more.
- Position the lter holder in the coffee assem-
bly by inserting the assembly downwards and
turning it from left to right until it locks.
USE
- In normal use, with primed circuit (See below
“Priming Circuit”)
- Before connecting the machine, check that
the buttons (F, G) are not pressed, and steam
control (R) is closed.
- With lled tank as per “Filling with water”
- Connect the appliance to the mains.
- Turn the appliance on using the Espresso on/
off switch (F).
- The heating icon (2) will blink on the LED
display (D).
- Blinking means it has started to heat up.
- The other icons will be on. (If they were not lit,
close the tap control (R) by turning and tighten-
ing clockwise)
- When (2) remains xed, it indicates that it has
reached the proper temperature.
- Place one or two pre-heated cups at the lter
holder outlet.
- Press the coffee switch (G1, G2), depending
on the cups you want to ll. With G1, coffee will
come out to ll 1 cup and with G2, for 2 cups.
- With G1 a cup from set (3) will ash and with
G2, both will ash (from set 3).
- Using G1 and G2 options, coffee will stop
automatically.
- You can also press the Manual Operation
button (G), and the Manual Operation icon (5)
will ash.
- Using Manual option, coffee will come out until
you press it (G) again to stop it.
- Once serving has nished, wait a few seconds
and remove the cups with the coffee.
- Remove the lter holder and empty the
grounds from it.
- Wash the lter holder with running water and
dry it well.
- Check that the removable lter is perfectly
tted into the lter holder.
- Fit the lter holder in the appliance once more.
PRIMING THE CIRCUIT
- (Only necessary when rst starting, or when
for any cause there is not enough water in the
circuit)
- Fill the receptacle as per “Filling with water”
- Connect the appliance to the mains.
- Without tting the lter holder (or with the lter
holder tted, but without coffee), place a recipi-
ent under the steam pipe (I).
- Turn the appliance on using the Espresso on/
off switch (F).
- Open the steam knob (R) by turning counter-
clockwise.
- The pump will start working.
- Water will exit through the steam pipe. Wait
until approximately one cupful has exited
- To nish serving, close the steam knob (R) by
turning clockwise.
- This will complete the priming operation.
OBTAINING STEAM:
- The steam is used to foam milk for cappuccino,
and also to heat other liquids.
- With the machine hot, that is, with the Heating
Icon (2) xed (or ashing)
- For Steam, press the Steam heating button (H)
and continue heating until the steam tempera-
ture has been reached.
- While heating, the Steam Function Icon (4) will
be ashing.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solac CE4497 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solac CE4497 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 2.29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info