797940

Sogo SS-5690 Manual

23
Zoom out
Zoom in
Previous page
1/84
Next page
23
español english français portuguese deutsch italiano
Tamp the coffee powder
downwards When the edge of tamper aligns
to edge of funnel, powder amount
is appropriate
7. Turn the funnel counterclockwise into the funnel bracket, and select the corresponding SINGLE or
DOUBLE button according to the filter size
NOTES:
1. When the bean box is not installed, the indicator of Grind button will illuminate in red solidly.
2. When the grinding function cannot be used normally, the indicator of Grind button will flash with thre
beeps can be heard.
3. When the grinder works continuously for 3 minutes and the intermediate rest time is less than 6 minutes,
the machine will limit the use of grinding function. After the rest time reaches 6 minutes, the machine will
automatically release the limitation and the grinder can resume to work again.
4. When the grinder is limited to use, press the GRIND button “ ”, the buzzer will sound three times, and
the indicator of Grind button will flash
Grinding time adjustment: You can set the grinding time as per your need. Keep pressing the GRIND
button “ ”, the indicator of Grind button will flash quickly and the gri der will start working. When it runs to
the time you want, release the GRIND button “ ”, the buzzer will sound, the machine will record the time.
Next time you grind, the grinder will run for the set time. The machine could only record the grinding time
over 6 seconds. If the grinding time is less than 6 seconds, the machine cannot record it.
NOTE: Hold and press “ ” and “ ” buttons at the same time, you can restore the grinder to factory
setting.
III. Restore to factory settings
In the case of wrong settings, the user can press and hold the four buttons of POWER, GRIND, SINGLE
and DOUBLE at the same time. The machine will beep and all the indicators will flash togethe 3 times.
Then the machine will return to the factory settings.
IV. Tool box and cleaning accessories
The machine is equipped with a tool box which is used for storing cleaning pin and cleaning brush. Single-
cup filter and double-cup filter can be stored in the tool box well. The tool box is placed at the left lower
part of appliance, where you can pull it out when you remove drip tray from the machine (Fig. 6).
Fig.6
Cleaning brush
Cleaning pin
Tool box
Cleaning pin
The cleaning pin is used for cleaning steam spout and filters. The thicker pin is for cleaning steam tube (Fig.
7), and thinner one is for filters (Fig.8)
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sogo SS-5690 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sogo SS-5690 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1.23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info