Manual Sogo SS-5690 (page 20 of 84) (English, German, French, Italian, Portuguese, Spanish)

797940

Zoom out

Zoom in

1/84

español english français portuguese deutsch italiano

BEFORE THE FIRST USE

Before the first use or the machine has not been used for a long time, you should follow below steps to

rinse and warm up the internal pipes of the machine.

1. Check and ensure that all accessories are complete and not damaged.

2. Fill the water tank with clean water, and water level should not exceed the “MAX” position.

3. Align the pressurized funnel with funnel bracket (no coffee powder is placed at this moment), and rotat

the funnel counterclockwise to lock it tightly (put in a single-cup or double-cup filter as needed)

4. Put a cup onto drip plate, plug in the appliance and press Power button, the machine enters into the

preheating mode. And the machine will enter into the standby mode after finish preheating

5. Turn the knob to hot water position , after a while, hot water will flow out from steam tube. Align the

steam tube to drip tray or use a cup to collect the hot water.

6. Press “ ” or “ ” to clean the pipes in machine, hot water will come out from funnel. Use the drip

tray or use a cup to collect the hot water.

NOTE: Do not extend any parts of your body closed to funnel and steam tube to avoid scalding during

brewing hot water.

7. After water stops flowing, pour away the water in drip tray or in the cup

8. Thoroughly clean the detachable parts of the whole machine with warm water.

NOTE: There may be noise when pumping water for the first time, it is normal

CHOOSE THE RIGHT COFFEE POWDER

Coffee powde

The coffee should be freshly ground and subjected to deep roasting. You may need to use French or

espresso roasted coffee powder for espresso coffee. Pre-ground coffee powder can only keep the aro

for 7 to 8 days unless it is stored in a sealed container, and place it in a cool place. Do not store coffee in

the refrigerator or freezer. In general, it is not recommended to use pre-ground coffee powde . The coffee

beans freshly ground are more easily to retain the aroma of the coffee and obtain higher coffee quali .

Grind

If you are making coffee, this step is a key step in the espresso making process and requires more

practice.

• The correct powder should look like salt.

•If the powder is too nely ground, it may cause the co󰀨ee to ow intermittently or fail to brew co󰀨ee.

• If the powder is too coarse, the water will flow through the coffee too quick , which will affect arom

and taste of the extracted coffe

• You can adjust the thickness of the ground coffee powder by adjusting the coffee bean box, which wi

vary depending on the type and quality of the coffee beans you use, so you need to make appropriat

adjustments to achieve the best results.

• Fresh roasted coffee beans (within 1 month), the grinding position is set between 5-10, the double-cu

grinder produces about 19g of powder and the single-cup of 13g, this will bring relatively good coffe

extraction effect

• In order to prevent the coffee beans from getting wet, affecting the grinding and the final coffee t

and effect, please do not put too much coffee beans in the bean bo

In order to obtain a uniform and consistent coffee powde , be sure to adjust the grinding degree

according to the type and quality of coffee beans to obtain a cup of high-quality coffe

OPERATION INSTRUCTION

I. Brewing coffee, function of hot water and stea

1. Fill the water tank with drinking water, the water level should not exceed the “MAX” position.

2. Plug in the power and press the Power button (make sure the knob is at “ ” position), then the machine

enters into the preheating mode. The specific operation is as follows

The functional buttons are of their corresponding indicators. There are 3 indicators around the knob,

and there are two functional indicators on the left and right separately. Indicators in different state

show various working modes of the machine. Coffee brewing, hot water and steam function canno

work at the same time, only one function can work in one time.

Warm up: Press the “ ” once, the whole machine enters into warm-up mode, the power indicator

“” lights up, and “ ” lights up at the same time.

Standby state: When the whole machine is warmed up, it enters into standby mode. At that time, the

indicators of Power button, Grind button, Single-cup button and Double-cup button light solidly, and the

coffee machine can be used normall .

Brew a single-cup of coffee: In the standby mode, install the single-cup filter into the funnel, loa

about 13 grams of coffee powde , use the coffee tamper and press the coffee powder with a force

about 12.5Kg, then align the funnel to the funnel bracket, turn the funnel counterclockwise to lock it. Put

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sogo SS-5690 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1.23 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sogo SS-5690 Manual

Product: