798725

Sogo SS-21075 Manual

11
Zoom out
Zoom in
Previous page
1/36
Next page
11español english français portuguese deutsch italiano
6. Ionizer Press ‘Ion’ button to activate the ionizer function. Ion icon on the screen will light and the
negative ion release will start. Ions attract to tiny particles in the air such as dust pollen, mold spores
etc. Which cause them to become too heavy to remain airborne. This feature let us to have dean air in
the environment.
7. Remote control: Works with CR2025 button cell. Before use, please pull out the card which is inserted
at the button of the remote control.
OPERATING THE WATER TANK
Check the level of water in the tank frequently. Be sure that water level is rat below the ‘MIN’ marking
which is located on the water lank. Activating the ‘Cooler’ function with insu󰀩cient amount of water may
cause malfunction of the water pump and the warranty of your product will be void.
Before relling water, turn your unit lo `O󰀨 position by pressing the switch located on the back panel and
unplug the power card.
USING THE ICE TUBES
In order to increase the cooling e󰀨ect of your fan, you can use ice tubes which are supplied with the
unit. Before using, ll them with water and place them in the freezing compartment of your refrigerator
for a few hours. Then place them into the large section of the tank and add water to the ‘MAX’ level.
Using the ice tubes will drop the temperature of the air ow which will create more e󰀨ective cooling
e󰀨ect.
CLEANING AND MAINTENANCE
After operation for long time, the dust cumulated in the dust lter or cooling pad may inuence the inow
of air. Therefore, it is recommended to clean your fan regularly. Please follow the steps below to clean
your device.
Turn o󰀨 the unit and unplug the power cord before cleaning and maintenance.
1. Dust Filter
To remove the dust lter, rst remove the screw, then simply press the locks with both hands and pull
it out. Use neutral cleaning agent and brush to clean the dust and dirty on the lter. To attach the clean
lter, place the bottom of the lter rst and then push upper part until it is locked tightly.
2. Cooling Pad
After removing the dust lter, you can see the cooling pad. Press the lock in the middle and gently pull
out the pad, use a clean or soft brush to remove dust and dirt from the pad. Rinse with water if needed
and Leave it to dry in open air. Never use any chemical cleaning solution that can harm pad.
3. Water Tank
Turn the water tank lock to horizontal position and pull the tank. Use soft cleaning agents for cleaning.
Wash with water and rinse the place it to its housing by pushing gently. Turn the lock to vertical position.
4. Exterior Cleaning
Clean the exterior case of the fan with a soft damp cloth except control panel. Never use hard cleaning
agent that can harm the case. Make sure the unit is dry before operating it.
Caution: Never let water contact with the control panel. Always clean it with a soft dry cloth.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sogo SS-21075 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sogo SS-21075 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0.6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info