Manual Sogo SS-21075 (page 10 of 36) (English, German, French, Italian, Portuguese, Spanish)

798725

Zoom out

Zoom in

1/36

10 español english français portuguese deutsch italiano

TECHNICAL SPECIFICATIONS

Rated Voltage/Frequency: 220-240V~ 50/60Hz

Power: 80W

ASSEMBLY OF THE AIR COOLER

1. Installation of Wheels: place 4 wheels to the holes located at the base of the air cooler. Insert the

wheels tightly to the air cooler’s body (Fig.1)

2. Filling Water: Turn the water tank lock to hori2ontal position, taking out the water tank, put in the ice

boxes and add clean tap water to large section of the to (Fig.-2 and -3). Be sure that water level in the

tank does not exceed the level `’MAX- which is located at the back of the tank.(Fig.-4)

Your cooler takes water from narrow section of the to and pumps it on the cooling pad. The water

owing through the cooling pad spills down to the large section of the tank. This cycle causes water to

absorb dust and dirt in the air. The lter at the middle of the tank lters and cleans the water, therefore

it should be attached to its place while the device is operating. Push the water tank to its housing and

turn the tank lock to the vertical position

Insert plug to the electrical outlet. The LED indicator showing the room temperature lights with a beep

sound and the air cooler switches to the stand by position. The function of the unit can be controlled via

on board control panel or by remote control.

1. ON/OFF : Press the ON button on the control panel or press the ONIOFF button on the remote control

to turn the unit on. The unit Will start at intermediate speed and then drop to slow speed_ To switch

back to the standby position, simply press the OFF button on control panel or press the ON/OFF button

on the remote control.

2. Speed: Wind speed can be adjusted to 3 levels as low¬ – Med - High by pressing the ‘Speed’ button,

Each time the ‘Speed’ button is pressed, an icon will appear on the LED screen indicating the current

speed level.

3. Timer: Press ‘Timer’ button to set the fan running time between 1-12 hours, which switches the unit to

standby after preset time. Each time the button is pressed, the hours will increase one by one and the

time indicator will light on the screen.

To cancel the timer, simply press the button until the indicator shows”00”

4. Swing: Press ‘Swing’ button to change the wind direction. The swing icon will appear on the screen

when the function is activated. Press the button again to stop the oscillation. The vertical direction of air

ow can be adjusted manually by directing the outlet louvers up and down.

5. Cooler: To activate the air cooler function, please press the

“Cooler” button. Water pump will take the water from the tank and pour it onto the cooling pad. Cooling

pad absorbs the heat of the water and the evaporated air is blown out by the help of fan. The cool

breeze blown by the cooler drops the temperature and creates a relaxing cooling e󰀨ect.

Caution: If the water Level is low or there is no water in the tank, do not activate the ‘Cooler’ function.

Check the water level and add water if needed_ Replace the stale water with fresh water. It is

recommended to replace water in the tank at least once in a week.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sogo SS-21075 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0.6 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sogo SS-21075 Manual

Product: