797918

Sogo SS-10722 Manual

18
Zoom out
Zoom in
Previous page
1/70
Next page
18
español english français portuguese deutsch italiano
cool down for 10 to 20 minutes.
2. If the display shows “LLL” after pressing the START/STOP button ( except the programs BAKE),
it means the temperature inside is too low (accompanied by 5 beep sounds), stop sound by pressing
the START/STOP button, open the lid and let the machine rest for 10 to 20 minutes to return to room
temperature.
3. If the display shows “EE0” after you have pressed START/STOP, the temperature sensor is
disconnected please check the sensor carefully by Authorized expert.
For the rst use
1. Please check if all parts and accessories are complete and free of damage .
2. Clean all the parts according to the latter section“Cleaning and Maintenance”
3. Set the bread maker in baking mode and bake empty for about 10 minutes. After cooling it down clean
once more.
4. Dry all parts thoroughly and assembly them, so the appliance is ready for using.
How to make bread
1. Place the pan in position and turn it clockwise until it clicks in correct position. Insert the kneading
blade onto the drive shaft. It is recommended to ll holes with heat-resisting margarine prior to placing
the kneaders, this avoids the dough to stick below the kneaders and the kneaders could be removed
from bread easily.
2. Place ingredients into the bread pan. Please keep to the order mentioned in the recipe.
Usually the water or liquid substance should be put rstly, then add sugar, salt and our, always add
yeast or baking powder as the last ingredient.
Note: the maximum quantities of the our and yeast which may be used refer to the recipe.
水或 液体
干的配料
酵母或苏打
Yeast or soda
Dry ingredients
Wate r or liquid
NOTE: The maximum quantity of our and yeast separately is 590g and 6g.
3. With nger make a small indentation on one side of the our. Add yeast to indentation,
Make sure it does not come into contact with the liquid ingredients or salt.
4. Close the lid gently and plug the power cord into a wall outlet.
5. Press the Menu button until your desired program is selected.
6. Press the COLOR button to select the desired crust color.
7. Press the LOAF button to select the desired size (1.5lb (680g) or 2.0lb (900g)).
8. Set the delay time by pressing + or - button. This step may be skipped if you want the bread maker to
start working immediately.
9. Press the START/STOP button to start working, and the working light comes on.
10.For the program of Basic, French, Whole wheat, Quick, Sweet, Ultra fast, Cake and Sandwich, 10
beep sound will be heard during operation. This is to prompt you to add ingredients. Open the lid and
put in some ingredients. It is possible that steam will escape through the vent slits in the lid during
baking. This is normal.
11. Once the process has been completed 10 beeps sound will be heard, and the working light will
extinguish. You can press START/STOP button for approx. 2 seconds to stop the process and take out
the bread. Open the Lid and while using oven mitts, rmly grasp the bread pan handle. Turn the pan
anti-clockwise and gently pull the pan straight up and out of the machine.
12. Use non-stick spatula to gently loosen the sides of the bread from the pan.
Caution: the Bread pan and bread may be very hot! Always handle with care and use oven mitts.
13. Turn bread pan upside down onto a clean cooking surface and gently shake until bread falls out onto
rack.
14. Remove the bread carefully from the pan and cool for about 20 minutes before slicing.
15. If you are out of the room or have not pressed START/STOP button at the end of operation, the bread
will be kept warm automatically for 1 hour, if you would like to take the bread out, switch the program
o󰀨 with the START/STOP button.
16. When do not use or completely operation, unplug the power cord.
Note: Before slicing the loaf, use the hook to remove out the kneading blade hidden on the
bottom of loaf. The loaf is hot, never use hand to remove the kneading blade.
Yeast or soda
Dry ingredients
Water or liquid
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sogo SS-10722 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sogo SS-10722 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info