797835

Sogo SS-10130 Manual

22
Zoom out
Zoom in
Previous page
1/80
Next page
22
español english français portuguese deutsch italiano
START/STOP button: once changed the time and temperature, press the START/STOP button to
begin cooking. If during the preheat process the START/STOP button being pressed the unit enters
into the pause mode and display starts ashing and shows the remaining time of cooking process. To
restart the cooking process, press START/STOP button again and unit will continue working.
If need to change the function mode during the preheat and cooking process, need to press START/
STOP button and then re-choose the function which you desire and press again Start/Stop button and
unit will start cooking with the new selected function.
STANDBY MODE: The unit will enter into the standby mode if there is not any interaction with the
control panel for about 1 min.
Also, the unit will enter into the standby mode if choosing function is stop or cancelled and there is not
any interaction with the control panel for 5 min.
Note: while the unit is in standby mode, at the same time, press Temperature arrow button and
Broil button together to change temperature unit from ºC to °F, display will show temperature in F, and
if need to change again do the same process again to penal displays the temperature in ºC mode.
During the preheat and cooking process also the temperature unit can be changed following the same
process as mentioned above.
BEFORE FIRST USE
1. Remove all packaging material, promotional labels, and tape from the unit.
2. Remove all accessories from the package and read this manual carefully. Please pay particular
attention to operational instructions, warnings, and important safeguards to avoid any injury or
property damage.
3. Wash the grill grate, splatter shield, Air fryer basket, cleaning brush, veggie tray ,grill plate and
cooking pot with warm, soapy water, then rinse and dry thoroughly. The grill plate, splatter shield, Air
fryer basket, cooking pot are also dishwasher safe. NEVER clean the main unit (motor part) in the
dishwasher.
USING YOUR 8 IN 1 INDOOR GRILL AND AIR FRYER
SPLATTER SHIELD
Located on the underneath of the hood, the splatter shield keeps the heating element clean. ALWAYS
ensure the splatter shield is installed while cooking, Failure to use the splatter shield will result in oil
build up on the heating element, which can cause smoking at the time of cooking.
Removing the splatter shield
Remove the splatter shield for cleaning after every use. First switch o󰀨 the appliance and detach the
cord from the wall outlet, allow the splatter shield to cool completely, then remove it by using your
thumb to release the front clip by pushing the front clip upward and using your other hand to pull one
of the tabs. This will release the splatter shield, allowing you to pull it out of the slot along the back of
the hood.
Installing the splatter shield
To install, gently push the splatter shield into the back of the hood. Insert the back tab o shield with
the slot on the back of the hood. Then push the splatter shield upward until it clicks into the clip on the
front of the hood.
COOKING FUNCTIONS
Ensure the unit is plugged in before turning it on, Press the power button.
GRILL
1. Place the cooking pot in the unit with the indent on the pot aligned with the rear bump on the main
unit. Then place the grill grate in the pot.
2. Press the GRILL button. The default temperature is HIGH 400°F / 205ºC and time is 20 minutes.
Press Grill or TEMP arrow buttons to adjust the temperature setting or grill mode available including
Low, Med, High and Max. if need press TIME arrow to adjust cooking time from 1 min to 30 min.
3. Press the START/STOP button to begin preheating. The light will turn on during preheating.
4. When Preheating is complete, the light will turn o󰀨 and unit will beep for 5 times.
5. The light of ADD FOOD will turn on.
6. Open the hood and place ingredients on the grill grate. Once the hood is closed, cooking will begin
and the timer will start counting down.
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sogo SS-10130 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sogo SS-10130 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2.04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info