Manual Soehnle Systo Monitor 180 (page 25 of 114) (English, German, Dutch, French, Italian, Portuguese, Spanish)

738950

Zoom out

Zoom in

1/114

2323

MEASURING

Measuring information

The measurements may be incorrect

under the following circumstances:

• Within 1 hour after a meal or a drink

• Measurements immediately after

consuming tea, coﬀee, or after

smoking

• Within 20 minutes after a bath

• While speaking or moving ﬁngers

• In a very cold environment

• With a strong urge to urinate

• Relax for 5 min. before measuring.

• Wait at least 3 min. between two

measurements. This allows the blood

ﬂow in your arm to return to normal.

• For a reasonable comparison of

various measurement values,

always attempt to measure in the

same situations. For example, take

your measurement daily at around

the same time and with the upper

arm in the position as shown to

you by a doctor.

Cu placement

1. Place the cuﬀ on the upper arm

and then turn the hose towards

the inside of the arm in line with

the pinkie ﬁnger. You can also

align the arterial mark so that it

is placed above the largest artery

(on the inside of the arm). You can

ﬁnd the largest artery by gently

pushing 2 ﬁngers approximately 2

cm above the crook of your arm,

on the inside of your left arm. Find

where the pulse can be felt the

strongest. This is where the largest

artery is located.

(Fig. 1)

2. The cuﬀ should be snug but not

too tight. It must be possible to

insert one ﬁnger between the cuﬀ

and your arm.

(Fig. 2)

3. Sit in a comfortable position and

place the arm on which the meas-

urement will be taken on a level

surface.

Sit down comfortably prior to

starting the measurement: do not

cross your legs, place the soles of

your feet on the ﬂoor, your back

and arm should be supported.

4. For users with hypertension:

The centre of the cuﬀ should be

at the level of the right atrium

(Fig. 3).

Starting the measurement

1. If the blood pressure monitor is

switched oﬀ, switch it on by push-

ing the key ( ). The device

performs the measurement.

• The device will ﬁrst zero adjust

itself

• The cuﬀ will then be inﬂated

and the device will measure the

blood pressure and pulse.

Push the key (

) to stop the measurement

at any time.

• Once the measurement is com-

pleted, the air is released from the

cuﬀ and the measured values will

be displayed. They will automat-

ically allocated to the selected

user and stored. Date and time

are shown alternately.

2. Push the key (

) to switch the

device oﬀ. The device switches oﬀ

automatically after 1 minute.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Soehnle Systo Monitor 180 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Soehnle Systo Monitor 180 Manual

Product: