619731

Snooper STP1400 Tyre Pilot Manual

5
Zoom out
Zoom in
Previous page
1/9
Next page
High/Low Pressure Alarm Level Setting
With the vehicle stationary and the STP1400 connected to the cigarette lighter socket.
Press and hold the SET button for 3 seconds to enter the setup mode, a beep will
be heard and Bar or PSI will begin to flash.
Press the SET button again for 1 second and UP will be displayed and a value,
below, will flash – press the SET button to change the pressure setting.
NOTE: This setting is MAXIMUM pressure. Once you have reached the correct
press setting press the SET button to set the LOW pressure and dO will be
displayed, press the SET button to change the value.
To exit the setup mode press an hold the SET button for 2 seconds or to set the
temperature alarm press the SET button for 1 second – refer to Temperature
Alarm Level Setting for details.
If the SET button is not pressed for two minutes the unit will automatically exit the
setup mode.
Temperature Alarm Level Setting
With the vehicle stationary and the STP1400 connected to the cigar lighter socket.
Press an hold the SET button for 3 seconds to enter the setup mode, the unit will
emit a beep and either Bar or PSI will begin to flash, press the SET button 3 times
until UP and oC is displayed.
Press the set button to change the HIGH temperature alarm value .
8 • UK
Bar Bar Bar
Flashing
Flashing
Press SET
For 1 sec
Press SET
For 1 sec
Once you have selected the unit of pressure press and hold the SET button for two
seconds to save and exit.
If the SET button is not pressed for two minutes the unit will automatically exit the
setup mode.
SUMMARY: Pressure Unit/ High Pressure Value/Low Pressure Value/High
Temperature Value setup sequence as below:
9 • UK
Bar
Press SET
For 1 sec
Press SET
For 1 sec
Press SET
For 1 sec
Flashing Flashing
Bar Bar
Important Notice
Purchasers of this product should not solely rely on this tyre pressure
monitoring system for safety and should check the condition and
pressure of their vehicles tyres on a regular basis as described by
the manufacturer of the vehicle or tyre manufacturer. Please note,
Snooper Tyre Pilot System operates on an RF system, as with many
RF tyre systems this system can occasionally suffer from interference
depending on the systems location; thus causing the system to be
inaccurate or not operate at all. Tyre pressures and temperatures are
not the only things that can affect tyre safety; we suggest daily visual
inspections and periodic checks of the vehicle tyres.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snooper STP1400 Tyre Pilot at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snooper STP1400 Tyre Pilot in the language / languages: English as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info