619693
12
Zoom out
Zoom in
Previous page
1/24
Next page
MEM
MUTE
12
Charging the internal battery
The Sapphire can be charged using either the cigarette lighter adaptor in your vehicle or via the USB cable
through your PC. If the unit is turned on the battery charge icon will be animated.
Once fully charged the battery will last approximately 3 hrs during normal use.
Note: The new battery’s full performance is only achieved after two or three complete charges and discharges.
Direct connecting/hard wiring your Sapphire
You can power your Sapphire by wiring it directly to your vehicles 12V electrical system using the ‘Hard Wire’
cable which is supplied as standard with your unit. First connect the positive side of the cable (marked with a
red plus symbol) to a 12V switched live. This is a live that is ON when the ignition is ON and OFF when the
ignition is OFF. The negative side of the lead should be connected to a negative ground, so it can be attached
to any metal portion of the vehicles frame. Next plug the small adaptor on the other end of the lead into the
12V DC input socket on the left side of the unit.
Important: If you are unfamiliar with this procedure, please consult a professional auto electrician.
Operating Instructions
1. Using the Sapphire for the first time
After you have performed a download and installed your Sapphire into your vehicle it is time to perform the first
start up. First make sure your vehicle is parked in as open a space as possible, clear of tall trees and buildings
so that the flip up GPS antenna has as clear a view of the sky above. Next switch the unit on by pressing the
Standby Power button for two seconds. The LCD graphical display will briefly display the ‘Snooper logo, Logic
# (see Section 7), Mway, City or All (see Section 9) and finally ’Searching for Satellites’ will flash on the screen
as the unit begins to search for satellite connection.
The Sapphire needs to acquire a minimum of four satellites in order to work. Once this has been achieved the
Sapphire will proceed to the Standby screen of your choice (See Standby Screen below). As soon as the
standby screen is displayed your Sapphire is ready to use and will now automatically alert you of any locations
stored in its database. A variety of audible and visual alert patterns are available. See ‘Features and Settings’
later in this user manual for more detailed information.
As the GPS engine and antenna have never been used before, the first ‘Cold’ start could take anywhere
from 15 – 50 minutes to establish a satellite connection. Once initialised, subsequent start ups will
take less time and eventually should take only a matter of minutes.
Please Note: If the unit is not used for some time the initial GPS start up may take longer than when the unit is
used regularly.
2. Standby Screen
There are eleven different screen colour settings for the standby display. To change the screen colour:
Press the ‘OK’ control to enter the menu – the
‘Set Alert Range’ menu option will be displayed.
Push the ‘OK’ control upwards until ‘Change
Screen Colour’ is displayed and then press the
‘OK’ control.
Move the ‘OK’ control left or right to scroll
through the screen colour options. When your
preferred setting is displayed, press the ‘OK’
control again. The unit will confirm the new
setting has been stored.
If you would like to exit the Menu at any time press
either the ‘MEM’ or the ‘MUTE’ button. If no buttons
are pressed for a period of five seconds the unit will automatically exit the Menu and return to your chosen
standby display.
Back to contents
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snooper Sapphire at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snooper Sapphire in the language / languages: English as an attachment in your email.

The manual is 2,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Snooper Sapphire

Snooper Sapphire Quick start guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info