Manual Snooper S6-R Neo (page 16 of 20) (English)

619691

Zoom out

Zoom in

1/20

3. S6-RLD External Installation

As the S6-RLD is waterproof it can be mounted outside the vehicle with

the ’L’ shaped bracket, water resistant double-sided tape and screw pack

provided.

- Find a suitable mounting position for the detector, ensuring that the front

of the unit has a clear view of the road ahead and is unobstructed by any

metallic objects and that there is a sufficient mounting area to attach the

’L’ shaped fixing bracket. The S6-RLD needs to be mounted in as

horizontal a position as possible so that it is looking directly down the

road ahead but can be mounted either flat or on it’s side if necessary.

We recommend that you mount the detector either behind the vehicles

grille (If the openings of the grille are at least 10mm in diameter) or within

an air intake at the front of the vehicle. The S6-RLD can be mounted

anywhere at the front of the vehicle, but for optimum performance we

suggest you mount it as close to the number plate of the vehicle as

possible.

- When you have found a suitable location, using the ’L’ shaped mounting

bracket as a template, drill between 2 and 4 pilot holes into the selected

mounting surface for attaching the bracket using either the self-tapping

screws or the nuts and bolts provided.

You will need to attach the bracket using

at least 2 screws or 2 nuts and bolts to

ensure that the bracket is well secured.

Remember that there is a lot of

vibration within the engine bay

so it is very important that the

S6-RLD mounting bracket is

secured correctly.

Typical Fitting

10mm

Minimum

Typical Fitting

and press the button below ’Select’ (5).

Then using the buttons below the

arrows on the display, highlight your

desired setting, either ’ON’ or ’OFF’.

Once you have made your choice

press the ’Select’ button. If you are

turning the setting ’ON’ the screen

will either display a factory default

speed or your previous speed selection.

Use the arrows to increase or decrease

the speed to your desired setting and press ’Select’. The screen will read

’SETTING CONFIRMED’ to confirm your selection and will return to the

Menu screen.

Note: To return to the Menu screen from the Sub Menu screen, press the

button below ’Back’ (2) on the display. To return to the Standby screen from

the Menu screen press the same button, which will now say Cancel . If no

buttons are pressed on the device for a period of five seconds the screen

will automatically return to the Standby display.

Please note that there could be a satellite delay of one or two seconds,

therefore the speed indicated by the device may be different to your

actual speed. Always check your speedometer for confirmation of your

vehicles speed.

5. Speed measurement type

This feature allows you to select between MPH and KMH. The device

comes with MPH turned on as the factory default setting. To change this

setting, please refer to the following instructions.

From the Standby screen press the

button below ’Menu’ on the LCD

display and then using the buttons

below the Up (3) and Down (4)

arrows, scroll the display until ’

SPEED MEASURE is highlighted

and press ’Select’ (5). Then using

the buttons below the arrows on the

display, highlight your desired setting,

either ’MPH’ or ’KMH’. Once you have

made your choice press the ’Select’ button.

The screen will read ’SETTING CONFIRMED’ to confirm your selection

and will return to the Menu screen.

Note: To return to the Menu screen from the Sub Menu screen, press

the button below ’Back’ (2) on the display. To return to the Standby

screen from the Menu screen press the same button, which will now say

Cancel . If no buttons are pressed on the device for a period of five

seconds the screen will automatically return to the Standby display.

2 3 4 5

SPEED : 30MPH

SUB MENU

2 3 4 5

MPH

KMH

BACK

SELECT

BACK

SELECT

SUB MENU

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Snooper S6-R Neo in the language / languages: English as an attachment in your email.

The manual is 2,44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Snooper S6-R Neo Manual

Product: