619670
9
Zoom out
Zoom in
Previous page
1/22
Next page
9
Return to contents
Power Connection & Charging
Powering and charging Lynx from the cigarette lighter socket
Lynx comes with a power cable designed to plug into your vehicles cigarette lighter socket. This lead will power the device but will
also charge Lynx’s internal battery. Firstly take the lead and plug the smaller end into the 12V DC input socket on the bottom left
hand side of Lynx and plug the cigarette lighter adaptor into your vehicles cigarette lighter socket. Press and hold the standby power
button on the left hand side of the units’ fascia for two seconds to switch on the device.
Please Note: Do not leave Lynx plugged into the cigarette lighter socket when you start your vehicle. The cigarette lighter
socket is prone to power surges as the vehicle is started and this may cause damage to your unit.
If the device does not power up please check that the cigarette lighter socket is clean of any debris, remembering not to insert
metal objects into the socket. Check that the cigarette lighter adaptor is inserted all the way into the socket and check that the fuse
in the cigarette lighter adaptor is operational. If Lynx will still not power up, please check that the cigarette lighter in your vehicle is
functioning correctly.
Replacing the Fuse
If Lynx does not switch on or the battery does not charge, the fuse in the cigarette lighter plug may have blown. To ascertain if the
fuse has blown, follow the steps below and if necessary replace it with a 2 amp, 5 x 20mm fast acting fuse.
Caution: Using a fuse that does not meet these ratings or defeating fuse protection can damage your unit, the power cable,
or the vehicles electrical system.
1. Grasp the ring near the tip of the cigarette
lighter plug, and then carefully unscrew the
ring by turning it counter clockwise.
Caution: If you must use pliers to loosen the
ring, be careful not to crush the tip. Never
use pliers or other tools to retighten the
ring on the cigarette lighter plug.
2. Pull the ring straight out, then remove the
metal tip and old fuse.
3. Check the fuse to see if it has blown. If it has,
replace it.
4. Replace the metal tip inside the ring, then
place the fuse inside the cigarette lighter
plug and screw the ring back onto the plug.
Make sure the metal tip is visible when you
reassemble the cigarette lighter plug.
Plug the smaller end into the 12V DC input socket
Plug the cigarette lighter adaptor into
your vehicles cigarette lighter socket
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snooper Lynx at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snooper Lynx in the language / languages: English as an attachment in your email.

The manual is 2,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info