809892
54
Zoom out
Zoom in
Previous page
1/80
Next page
54
v1.05
Admin and Installation Guide M900 Description of Settings
Setting Description
Local SIP port The source port used for SIP signaling.
Permitted values: Port number default 5060.
SIP ToS/Qos Priority of call control signaling trac based on both IP layers of Type of
Service (ToS) byte. ToS is referred to as Quality of Service (QoS) in packet-
based networks.
Permitted values: Positive integer, default is 0x68.
RTP port The rst RTP port to use for RTP streaming.
Permitted values: Port number default 50004 (depending on the setup).
RTP port range The number of ports that can be used for RTP audio streaming.
Permitted values: Positive integer, default is 40.
RTP TOS/QoS Priority of RTP trac based on the IP layer ToS byte. ToS is referred to as
Quality of Service (QoS) in packet-based networks. See RFC 1349 for details.
The "cost" bit is not supported.
Bit 7..5 denes precedence
Bit 4..2 denes Type of Service (ToS
Bit 1..0 are ignored
Permitted values: Port number default 5060.
SIP registration mode This feature denes the method the base station nds the provisioning server.
The default is Plug-n-Play.
Plug-n-play: When Plug-n-Play is enabled, the base station will send a SIP
SUBSCRIBE to a multicast address. See https://service.snom.
com/pages/viewpage.action?pageId=17370665 for a detailed
description.
Static: #When the setting is set to Static, SIP plug-n-play is disabled, and
another method, e.g., a DHCP option, is used to nd the server.
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snom M900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snom M900 in the language / languages: English as an attachment in your email.

The manual is 4.38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Snom M900

Snom M900 User Manual - English - 44 pages

Snom M900 User Manual - German - 79 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info