621560
18
Zoom out
Zoom in
Previous page
1/44
Next page
18
v1.06
Provisioning Guide M900, M700, M300 Settings and Conguration
Global Settings
Setting Valid value(s) Description
rtp_port_start e.g. 50004 This setting species the RTP start port which is
used for RTP trac.
Default Value: 50004
rtp_port_end e.g. 50044 This setting species the RTP end port which is used
for RTP trac.
Default Value: 50044
codec_tos 0-255 This option enables the phone to support quality of
service (QOS) for RTP trac in a network.
Default Value: 160
sip_r_key_dtmf_string This string species the DTMF that is sent via SIP
when the R key is pressed. Not applicable to all
congurations.
Default Value: <empty>
network_id_port e.g. 5060 This setting species the SIP port which is used for
SIP trac.
Default Value: 5060
signaling_tos 0-255 This option enables the phone to support quality of
service (QOS) for SIP trac in a network.
Default Value: 160
sip_stun_bindtime_
determine
o / on If STUN is enabled and sip_stun_bindtime_guard is
dened, setting this to 1 forces the base station to
automatically determine the duration of NAT bindings
in the system. In this case, sip_stun_bindtime_guard
denes the initial test duration.
Default Value: on
sip_stun_bindtime_
guard
e.g. 80 If STUN is enabled, this value species in seconds
how often the system will guard the NAT bindings.
Default Value: 80
stun_binding_interval e.g. 90 If STUN is enabled, stun_binding_interval denes
how often (in seconds) keepalive are sent in order to
keep NAT bindings. If sip_stun_bindtime_determine
is set, stun_binding_interval will be overruled and
keep-alives will be sent with a frequency of half the
determined bindtime.
Default Value: 90
sip_use_dierent_ports o / on If this is enabled, network_id_port species the
source SIP port used for the rst instance, and all
following will use succeeding ports. If disabled, the
same port will be used for all accounts.
Default Value: o
srv_xsi_caller_id_
blocking
This setting is used to enable/disable the Xsi Caller
ID blocking service.
Default Value: enabled
log_level -1 = o
6 = normal
8 = system
7 = debug
This setting denes the log level of the syslog
messages that are logged.
Default Value: 6
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snom M700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snom M700 in the language / languages: English as an attachment in your email.

The manual is 0.71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Snom M700

Snom M700 User Manual - English - 84 pages

Snom M700 User Manual - English - 38 pages

Snom M700 User Manual - English - 58 pages

Snom M700 User Manual - German - 82 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info