621560
16
Zoom out
Zoom in
Previous page
1/44
Next page
16
v1.06
Provisioning Guide M900, M700, M300 Settings and Conguration
Global Settings
Setting Valid value(s) Description
network_sntp_
broadcast_enable
o / on Enables reception of SNTP broadcasts from an SNTP
server and thereby syncing with the received server
time.
Default Value: on
ntp_server e.g. 10.110.21.254 Species the domain name or the IP address of the
NTP server.
Default Value: <empty>
ntp_refresh_timer e.g. 3600 Specify the time in seconds after which the phone
contacts the NTP server again to refresh the time.
Default Value: 3600
stun_server e.g. stun.Snom .com This setting refers to the DNS name or IP address of
the STUN server.
Default Value: empty
vlan_id e.g. 101 This setting sets the VLAN id of the base in order to
connect to anything residing in a specic VLAN.
Default Value: <empty>
network_vlan_
synchronization
o / on When the VLAN ID in a multicell system changes,
this setting determines whether the new VLAN ID is
sync'd to the other bases or not.
Default Value: on
vlan_qos e.g. 7 This setting sets the VLAN priority of the base in
order to connect to anything residing in a specic
VLAN.
Default Value: <empty>
dhcp_option_pnp o / on Enable/disable DHCP provisioning.
Default Value: on
dhcp o / on This setting species whether DHCP is enabled or
not. If it is disabled, the base will use the congured
static IP address.
Default Value: on
dns_server1 e.g. 8.8.8.8 This setting stores the address of the primary DNS
server. If DHCP is disabled, the address of the
primary DNS server has to be entered here.
Default Value: <empty>
dns_server2 e.g. 8.8.4.4 This setting stores the address of the secondary
DNS server. If DHCP is disabled, the address of the
secondary DNS server has to be entered here.
Default Value: <empty>
gateway e.g. 10.0.0.1 This setting changes the gateway of the device. If
DHCP is disabled, the gateway must be entered here.
Default Value: <empty>
ip_adr e.g. 192.168.1.2 This setting changes the IP address of the device. If
DHCP is disabled, the IP address must be entered
here.
Default Value: <empty>
netmask e.g. 255.255.255.0 This setting changes the netmask of the device. If
DHCP is disabled, the subnet mask must be entered
here.Default Value: <empty>
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snom M700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snom M700 in the language / languages: English as an attachment in your email.

The manual is 0.71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Snom M700

Snom M700 User Manual - English - 84 pages

Snom M700 User Manual - English - 38 pages

Snom M700 User Manual - English - 58 pages

Snom M700 User Manual - German - 82 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info