809890
68
Zoom out
Zoom in
Previous page
1/76
Next page
68
v1.01
Admin and Installation Guide M400 Description of Settings
Setting Description
State Enabled: Repeater has been registered on the base station.
Present@RPNxx: Repeater with DEC source RPNxx (base station or other
repeater) is connected to the base station.
FW info 
FWU progress Progress states:
O: No update in progress.
Initializing: Update has been initiated.
X%: Update in progress, X% completed.
VerifyingX%
"Conn. term. w ait” (Repeater): Firmware has been updated; repeater will
restart when there are no active calls in system.
Complete HS/repeater: Update complete.
Error
Alarm

"Emergency alarm" on page 30. M25 and M30 does not support emergency alarms.

Handset page. For
more information, see "Selecting emergency alarm setting" on page 25 .
Setting Description
Idx 
 

Alarm type Select Alarm Button from the drop-down menu to enable the alarm feature.
Default: Disabled.
Alarm signal The Call setting is mandatory. When the alarm button on the handset is

Alarm settings.
Mandatory default: Call.
Note: 
Stop alarm from handset Establishes whether or not an alarm can be cancelled from the handset.
Default: Enabled.
Trigger delay The number of seconds from the moment the handset's alarm button is
pressed until the handset calls the alarm number or, if a pre-alarm delay is

Default: 0.
Stop pre-alarm from handset Establishes whether or not a pre-alarm can be cancelled from the handset.
Default:: Enabled.
Pre-alarm delay The number of seconds from the moment the handset's alarm button is
pressed until the handset calls the alarm number. The display will show
the "Pre-alarm triggered" message, and the emergency ringer, if set, will be
played.
Default: 0.
68


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snom M400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snom M400 in the language / languages: English as an attachment in your email.

The manual is 2.25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info