621561
18
Zoom out
Zoom in
Previous page
1/38
Next page
18
v1.05
Provisioning Guide M700, M300 Settings and Configuration
Server Settings
Setting Value(s) Description
session_timer
idx=1-10
e.g. 3600 If timer_support is enabled, this option specifies
the SIP session timer in seconds.
Default Value: 3600
user_expiry
idx=1-10
e.g.
3600 Specifies the maximum time between SIP re-
registrations in seconds.
Default Value: 3600
keepalive_interval
idx=1-10
o / on Specifies whether k
eepalive message will be sent
out to the registrar/proxy port in order to have the
port stay open and the phone remain reachable.
Default Value: on
user_hold_inactive
idx=1-10
o / on Specify if y
ou want to indicate a hold request with
sdp parameter send-only or inactive. Some pbx's
need the inactive setting for proper music-on-hold
operation.
Default Value: o
user_host idx=1-10 e.g. server.snom.com Specifies the IP or DNS address of the registrar/
proxy where you want to register this account.
Default Value: <empty>
user_outbound
idx=1-10
e.g. 10.110.24.111:5060 Specify the outbound proxy in this field (format:
addr:port) to ensure all SIP packets are sent via
the specified communication point.
Default Value: <empty>
user_srtp
idx=1-10
o / on Enables/disables encryption of outgoing audio
R
TP streams. This setting has to be enabled if
srv_srtp_auth is set to on. Likewise this has to be
turned o when srv_srtp_auth is o.
Default Value: o
user_full_sdp_answer
idx=1-10
o / on When the setting is turned o, the base returns a
list of all available codecs in the SDP in response
to INVITE requests.
Default Value: o
codec_priority_list
idx=1-10
pcmu, pcma, g729, g722,
g726
Prioritize which codecs the base should use.
Prioritized comma-separated list with max. of 5
entries, most desired codec up front.
Default Value: pcmu, pcma, g726
codec_size
idx=1-10
20, 30, 40, 60 Specifies the packet size in ms for the respective
codec.
Default Value: 20
conferencing
idx=1-10
e.g. conferencing.snom.com This setting specifies the address or FQDN of a
conference server.
Default Value: <empty>
user_auth_tag
idx=1-10
on = AES-32
o = AES-80
When the setting is set to on, the base oers an
AES-32 auth-tag for SRTP. If turned o, AES-80 is
used.
Default Value: on
srv_att_transfer_2nd_
call_on_hold
idx=1-10
o / on Specifies the attended transfer behaviour of the
base. If turned on, the second call will be put on
hold. If turned o, the second call is not put on
hold.
Default Value: on
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snom M300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snom M300 in the language / languages: English as an attachment in your email.

The manual is 0,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Snom M300

Snom M300 User Manual - English - 44 pages

Snom M300 User Manual - English - 84 pages

Snom M300 User Manual - English - 58 pages

Snom M300 User Manual - German - 82 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info