621561
59
Zoom out
Zoom in
Previous page
1/84
Next page
59
v1.06
Admin and Installation Guide M700, M300 Description of Settings
Handset settings are on-screen:
Setting Description
Idx Index of handsets. Handsets are numbered consecutively by the base station.
With checkbox for registering handsets at and deregistering or deleting them
from the base station.
IPEI International Portable Equipment Identier for DECT handsets which is unique
worldwide. It consists of the equipment manufacturer code (EMC) and a
portable serial number (PSN) issued by the manufacturer.
Handset State Present, detached, located, removed, enabled,.
Present@RPNxx: The handset is located at the base station with RPNxx (radio
xed part number).
Detached: The handset is turned o.
Located: The handset is congured to locate on a specic base station, but is
unable to do so (e.g., the base station is turned o).
Removed: The handset has not been used for a specied amount of time.
Enabled: Registration has been set up for handset, but handset has not
registered yet.
Handset Type FW Info Type of handset (e.g., M65) and rmware version (e.g., 324.7) on the handset
FWU Progress During a rmware update, this eld displays the update's progress.
O: No update in progress
Initializing: Update is starting
x%: Update in progress, x percent done
Verifying x%: Update writing completed, FW verication ongoing
Waiting for charger: Firmware has been transmitted to handset; update will
begin when handset is placed in charger.
Conn. term.wait: Firmware has been transmitted to repeater; update will begin
when system is idle.
Complete: Firmware on handset/repeater has been updated
Error: Unable to update (le not found, le invalid etc.)
Extension The extension number shown on the handset's display
Handset settings
When you click on Add Handset, the Handset page opens; the text eld for the IPEI contains the place
holders FFFF. When you click on the IPEI of a handset, the Handset page for editing that handset's
settings opens; the text eld for the IPEI contains the IPEI's 10-digit string of numerals and capital
letters.
Setting Description
IPEI International Portable Equipment Identier for DECT handsets which is unique
worldwide. It consists of the equipment manufacturer code (EMC) and a
portable serial number (PSN) issued by the manufacturer.
AC This is the access code for registering the handset at the base station. The
default is 0000 (four times zero). NOTE: This access code is not to be
confused with either the PIN for resetting the handset to factory values or
for deregistering it from the base station (default also 0000) or the PIN for
accessing the mailbox.
Alarm Line As required by PBX or VoIP provider
Alarm Number As required by PBX or VoIP provider
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snom M300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snom M300 in the language / languages: English as an attachment in your email.

The manual is 2.57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Snom M300

Snom M300 User Manual - English - 44 pages

Snom M300 User Manual - English - 38 pages

Snom M300 User Manual - English - 58 pages

Snom M300 User Manual - German - 82 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info