621561
47
Zoom out
Zoom in
Previous page
1/84
Next page
47
v1.06
Admin and Installation Guide M700, M300 Firmware Update
Firmware Update
When rst installing the base station, Snom recommends updating to the latest rmware version.
Please go to www.snom.com to see if a new version is available and to download it.
You can either use the Snom M series update server or download the les to your own server and
update the rmware from there.
Note: We recommend to always operate the base station and the connected wireless
devices with the same rmware version.
Although it is possible to update an active live system, we cannot guarantee its
uninterrupted functionality. We therefore recommend performing wireless updates
when the whole system is idle.
Considerations before updating
On average, it takes 10 - 15 minutes to transmit the rmware le to the wireless devices, but it
could take up to 60 minutes depending on trac (voice trac has priority).
Using a handset will pause the transfer process to it. It will continue once the handset is back in
idle mode.
Once the rmware has been transferred, the actual update of each wireless device takes approx.
one minute.
The M700 can update up to 10, the M300 up to 5 wireless devices at a time. If more devices are
registered with the base, they will be updated successively.
Note: The base station randomly selects the devices for rmware transfer. It is not
possible to assign priority to certain devices.
Repeaters will start updating automatically when there are no ongoing calls, resulting in a service
interruption of approx. one minute.
Multicell installations.
The M700 will update all handsets in range, including devices registered on another base
station.
When a user moves from within the range of one base station to another, the update will
continue as long as sucient update capacity is available.
When a multicell installation is fully occupied with rmware transfers, handover/roaming will
fail, i.e., active calls may be lost.
When an update is initiated on one base station, all base stations will perform an update.
Updating manually
Manual updates are performed in several steps: Downloading the update les for registered wireless
devices to the base station and transmitting them from the base station to the devices, updating the
base station, and updating the handsets by placing them in their chargers.
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snom M300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snom M300 in the language / languages: English as an attachment in your email.

The manual is 2.57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Snom M300

Snom M300 User Manual - English - 44 pages

Snom M300 User Manual - English - 38 pages

Snom M300 User Manual - English - 58 pages

Snom M300 User Manual - German - 82 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info