809886

Snom M200 SC Base Station Manual

14
Zoom out
Zoom in
Previous page
1/120
Next page
14
v1.01
M200SC Administrator and Provisioning Manual Configuration using the phone menus
5. Press q and enter the IP address for the primary DNS server. Use the dial pad to enter characters. To add a
period, press the * key.
6. Press q and enter the IP address for the secondary DNS server. The M200SC uses this server if the primary
server does not respond.
7. Press SAVE.
Setting static DNS
1. From the Network setting menu, press qor p to highlight IPv4 or IPv6 whichever is in use in Static mode,
and then press the MENU key.
2. Highlight Set static DNS and then press SELECT. The Set static DNS menu appears.
3. Press the MENU key to set Static DNS to Enabled.
4. Press q and then enter the IP address for the primary DNS server.
5. Press q and then enter the IP address for the secondary DNS server.
6. Press SAVE.
Setting PPPoE
1. From the Network setting menu, press p or q to highlight IPv4 (which must be in PPPoE mode), and then
press MENU key.
2. Highlight Set PPPoE and then press SELECT. The Set PPPoE menu appears.
3. Enter the PPPoE account username.
4. Press q and then press the MENU key if you are required to enter a PPPoE account password.
5. Enter the password.
6. Press SAVE.
Setting the VLAN ID
1. From the Network setting menu, press qor p to highlight VLAN ID, and then press the MENU key.
2. On the VLAN ID menu (see Fig. 5, above), press the MENU key to enable or disable the WAN Port.
3. Press q and enter the WAN VID. Use the dial pad and BACKSP to enter characters. The valid range is 0 to
4095.
4. Press q and enter the WAN priority. The valid range is 0 to 7.
5. Press SAVE.
Using the secure browsing menu
Turning on secure browsing:
1. From the Admin settings menu, pressq or p to highlight Secure browsing, and then press the MENU key.
2. On the Secure browsing menu, press the MENU key to enable or disable HTTPS.
3. Press SET to save the setting.
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snom M200 SC Base Station at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snom M200 SC Base Station in the language / languages: English as an attachment in your email.

The manual is 4.91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info