809850
70
Zoom out
Zoom in
Previous page
1/190
Next page
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
70
Setting Description
Static IP When Static IP is selected, you must enter a static IP
address for the M100 SC, as well as addresses for the
Subnet Mask, Gateway, and DNS Server(s).
IP Address If DHCP is disabled, enter a static IP address for the M100
SC.
Subnet Mask Enter the subnet mask.
Gateway Enter the address of the default gateway (in this case, your
router).
PPPoE Select to enable PPPoE (Point-to-Point Protocol over
Ethernet) mode.
Username Enter your PPPoE account username.
Password Enter your PPPoE account password.
Manually Configure DNS
Select to enable manual DNS configuration.
Primary DNS If DHCP is disabled, enter addresses for the primary and
secondary DNS servers.
Secondary DNS
IPv6
Setting Description
Disable Disables all related IPv6 settings.
Auto Configuration Auto configuration is selected (enabled) by default, which
means the M100 SC will get its IP address, Gateway, and
DNS Server(s) from the network. When Auto Configuration is
disabled, you must enter a static IP address for the M100
SC, as well as addresses for the Gateway and DNS
Server(s).
Static IP When Static IP is selected, you must enter a static IP
address for the M100 SC, as well as an IPv6 address
prefix, Gateway, and DNS Server(s).
IP Address If Auto Configuration is disabled, enter a static IP address for
the M100 SC.
Prefix (0128) Enter the IPv6 address prefix length (0 to 128 bits).
Gateway Enter the address of the default gateway (in this case, your
router).
Manually Configure DNS
Select to enable manual DNS configuration.
Primary DNS If Auto Configuration is disabled, enter addresses for the
primary and secondary DNS servers.
Secondary DNS
70


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snom M100 SC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snom M100 SC in the language / languages: English as an attachment in your email.

The manual is 7.22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info