809850
68
Zoom out
Zoom in
Previous page
1/190
Next page
M100 SC Administrator and Provisioning Manual
Back to Contents
Using the WebUI
68
Network Pages
You can set up the M100 SC for your network configuration on the Network pages. Your
service provider may require you to configure your network to be compatible with its
service, and the M100 SC settings must match the network settings.
The network settings are grouped into Basic and Advanced Settings. IPv4 and IPv6
protocols are supported.
When both IPv4 and IPv6 are enabled and available, the following guidelines apply when
determining which stack to use:
For outgoing traffic, the IP address (or resolved IP) in the server fieldeither IPv4
or IPv6will determine which stack to be used.
In general, most operations can be associated with one of the servers listed on the
“Basic Network Settings” page. However, for operations triggered by/dependent
upon network status, the phone must determine which server to use. For example,
a special case like the "Network down" LED indication on the base station can be
ambiguous for server association. Because its primary purpose is to aid in
troubleshooting SIP registration issues, this case will be associated with the SIP
registration server.
DNS entries with both IPv4 and IPv6 settings can be used to resolve FQDN entries.
There are no preferences with the order of the DNS queries.
Pcap should include traffic for both stacks.
Dual stack operations should be transparent to PC port traffic.
PnP is not supported on IPv6.
VPN is not supported in IPv6 or PPPoE.
The network settings are also available as parameters in the configuration file. See
“"network" Module: Network Settings” on page 140.
After entering information on this page, click to save it.
68


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snom M100 SC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snom M100 SC in the language / languages: English as an attachment in your email.

The manual is 7.22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info