332153
9
Zoom out
Zoom in
Previous page
1/12
Next page
20
What to do if trouble occurs
GB
What to do i f trouble occurs
Interference with and repairs to the appliance by unqualified
persons are dangerous as they can result in electric shock, or
short circuit. Do no interfere with or try to repair the appliance;
this could cause injury and damage to the appliance. Therefore
always have such work done by an expert, e.g. the technical
Customer Service.
Please note
If your appliance is faulty, please check whether you can remove
the problem yourself by consulting these instructions for use.
But there are some problems described below that you can
fix yourself.
The fuses blow regularly?
Contact a technical customer service or an electrician!
You can't switch you induction hob on?
Has the wiring system (fuse box) in the house blown a fuse?
Has the hob been connected to the mains?
Have the cooking zones been deactivated (child safety
device), i.e. a is shown in the display?
Are the sensor keys partly covered by a damp cloth, fluid or a
metallic object? Please rectify.
Are you using unsuitable cookware? See the section on
“Cookware for induction hobs“.
Has the hob or a cooking zone suddenly switched on and is
the display showing
dashes?
Food which has boiled over or another object is currently on
the “touch-control“ sensor keys. Please clean or remove.
The electronic unit is too hot. Check the installation of the hob.
Make sure that there is sufficient ventilation.
Is the power setting blinking?
A cooking zone has been switched on and the hob is expecting a
suitable pot or pan to be placed on the cooking zone (pan
recognition). Only when a pot has been placed on the cooking
zone will power be supplied.
Is the power setting blinking again, although a pot has been
placed on the cooking zone?
The cookware is unsuitable for induction cooking or the pot or
pan is too small.
Is the cookware you are using making noises?
This is due to technical reasons; the induction hob and the pot
are not at risk.
Does the cooling fan still operate after it has been switched
off?
This is normal since the electronic unit is being cooled down.
Is the hob making noises (clicking or cracking sounds)?
This is for technical reasons and cannot be avoided.
Does the hob have tears or cracks?
If cracks, fractures or any other defects appear in your glass
ceramic hob, immediately switch off the appliance. Disconnect
fuse immediately and call the technical Customer service.
Protection against overheating
If the hob is used at full power for a lengthy period, the power
electronics may no longer be cooled to the necessary extent at
room temperature.
To ensure that no excessive temperatures occur in the
electronics, the power of the cooking zones may be reduced
automatically.
If, during normal use of the hob and at normal room temperature,
a row of dashes or “F7” appears frequently in the cooking setting
display, the cooling is probably not sufficient.
The reason may be that there are no openings for cooling
purposes in the kitchen units or that there is no insulation. It may
be necessary to check the installation of the hob.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smeg se2732id at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smeg se2732id in the language / languages: English as an attachment in your email.

The manual is 0,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Smeg se2732id

Smeg se2732id User Manual - German - 12 pages

Smeg se2732id User Manual - Dutch - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info