361454
96
Zoom out
Zoom in
Previous page
1/108
Next page
96
7 - PETIT GUIDE DE DÉPANNAGE
F
7 - DEFEKTE UND LÖSUNGEN
D
7 - DIFETTI E RIMEDI
I
7 - TROUBLESHOOTING
GB
CAUSE
CURE
The message COFFEE PUMP ERROR appears on the display
(the pump stops after the pre-set time).
a) The water circuit has not been
filled.
b) The water suction pipe is bent.
c) Because the coffee has been
ground too nely.
d) Because there is too much
ground coffee.
e) The water circuit is blocked by
scale.
f) The electronic board has broken
down.
g)
The pump has broken down.
h) There is a fault in one of the
electrical parts (pump, solenoid
valves etc.).
a) Fill the water circuit (see pa-
ragraph 4.5).
b) Avoid squeezing.
c) Turn the grinder knob towards
COARSE (see paragraph 4.7).
d) Decrease the amount of ground
coffee (see paragraph 4.9).
e) De-scale the machine (see
paragraph 6.7)
f)
Contact an authorised technical
assistance centre.
g)
Contact an authorised technical
assistance centre.
h)
Contact an authorised technical
assistance centre.
CAUSA RIMEDIO
Il display visualizza la dicitura ERRORE POMPA CAFFE’ (la
pompa si ferma dopo il tempo prefissato).
a) Non è stato effettuato il caricamen-
to del circuito idrico.
b) Il tubo di pescaggio dell’acqua è
piegato.
c) Perc la macinatura del caf è
troppo ne.
d) Perchè la quantità del caffè maci
-
nato è eccessiva.
e) Il circuito idrico è ostruito da forma
-
zioni di calcare.
f) Il cablaggio è interrotto.
g) La scheda elettronica è guasta.
h) Componenti elettrici guasti (pom
-
pa, elettovalvole ecc.)
a) Caricare il circuito idrico (ve-
dere paragrafo 4.5).
b) Evitare schiacciature.
c)
Girare la manopola della ma-
cinatura verso la posizione
GROSSO (vedere paragrafo
4.7).
d)
Diminuire la quantità del caffè
macinato (vedere paragrafo
4.9).
e) Eseguire la decalcificazione
della macchina (vedere para
-
grafo 6.7).
f) Rivolgersi ad un centro assi
-
stenza autorizzato.
g) Rivolgersi ad un centro assi
-
stenza autorizzato.
h) Rivolgersi ad un centro assi
-
stenza autorizzato.
CAUSE SOLUTION
Le visuel affiche le message ERREUR POMPE CAFE (la pompe s’arrête
après un délai préétabli).
a) Le circuit hydrique n’a pas
été rempli.
b) Le tuyau daspiration de
l’eau est plié.
c) La mouture du café est trop
fine.
d) La quantité du café moulu
est trop abondante.
e) Le circuit hydrique est entar-
tré.
f) Le branchement a été inter-
rompu.
g) Défaut de la carte électroni-
que.
h) Usure des composants élec-
triques (pompe, électrovan-
nes, etc.)
a) Remplissez le circuit hydri-
que (cf. paragraphe 4.5).
b) Evitez d’écraser le tuyau.
c) Tournez la manette de la
mouture vers la position
GROSSIERE (cf. paragra-
phe 4.7).
d) Diminuez la quantité de
café moulu (cf. paragraphe
4.9).
e) Effectuez le détartrage de
la machine (cf. paragraphe
6.7).
f) Adressez-vous à un cen-
tre de service après-vente
agréé.
g) Adressez-vous à un cen-
tre de service après-vente
agréé.
h) Adressez-vous à un cen-
tre de service après-vente
agréé.
URSACHE LÖSUNG
Auf dem Display erscheint die Nachricht: FEHLER KAFFEEPUMPE
- die Pumpe läuft länger als programmiert.
a) Der Wasserkreislauf ist ni-
cht aufgefüllt worden.
b) Der Wasserzufuhrschlauch
im Wasserbehälter ist abge-
knickt.
c) Der Kaffee ist zu fein gema-
hlen.
d) Zu viel gemahlener Kaffee
ist vorhanden.
e) Der Wasserkreislauf ist du-
rch Kalkformationen unter-
brochen.
f) Die Kabelverbindung ist un-
terbrochen.
g) Der elektronische Mikrochip
ist defekt.
h) Elektrische Komponenten
sind defekt (Pumpe, Elektro-
ventil, usw.)
a) Füllen Sie den Wasserkrei-
slauf (siehe Paragraph 4.5).
b) Vermeiden Sie Druckstellen
und Quetschungen.
c) Verstellen Sie den Knopf
der Mühle Richtung GROB
(siehe Paragraph 4.7)
d) Verringern Sie die Menge an
gemahlenem Kaffee (siehe
Paragraph 4.9).
e) Führen Sie eine Entkalkung
der Maschine durch (siehe
Paragraph 6.7)
f) Wenden Sie sich an ein auto-
risiertes Servicezentrum.
g) Wenden Sie sich an ein auto-
risiertes Servicezentrum.
h) Wenden Sie sich an ein auto-
risiertes Servicezentrum.
96


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smeg scm1-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smeg scm1-1 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 3,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info