72820
9
Zoom out
Zoom in
Previous page
1/20
Next page
Instructions for the User
51
The table below states the minimum pan diameters for each cooking zone.
Zone number: Pan minimum
diameter:
Pans larger than the cooking zones can also be used, but it is
important to ensure that the bottom of the pan does not touch other
cooking zones, and that it is always centred over the perimeter of the
cooking zone.
1 90 mm
2 110 mm
3 140 mm
4 90 mm
Use only vessels specially designed for induction cooking, with thick, completely flat bottom; if these
are not available, the pans used must not have crowned (concave or convex) bottom.
YES NO NO
8.1.3 Pan present device
Each cooking zone is equipped with a “pan present” device, which ensures that cooking cannot start
unless a suitable pan is present on the cooking zone and properly positioned.
If the user attempts to switch on the cooking zone with the pan not positioned properly or with a pan
which is not of suitable material, a few seconds after the zone is switched on the symbol will appear
on the display to warn the user that an error has been made.
8.1.4 Residual heat
Each cooking zone is equipped with a device which warns of residual heat. After any cooking zone is
switched off, a flashing “ ” may appear on the display. This warns that the cooking zone concerned is
still very hot. Cooking can be restarted even while the is still flashing: in this case, proceed as
described in section “3”.
8.1.5 Locking-out the hob
When not in use, the hob can be “locked out” to prevent children from accidentally switching it on.
With the cooking zones off, turn the knobs of zones 2 and 3 to the left simultaneously and then release them.
The displays of zones 1 and 4 will show the “
L” symbol, indicating that the cooking zone lock-out function
has been activated.
To deactivate it, repeat the same procedure: the displays of zones 1 and 4 will show the “
L”symbol,
indicating that the cooking zone lock-out function has been deactivated.
8.1.6 Electronic circuit board thermal protection
The appliance is equipped with a device which constantly measures the temperature of the electronic
circuit board.
If the temperature should exceed preset values, the device will trigger specific functions to reduce the
temperature and allow the ceramic hob to keep operating correctly.
The following table lists the automatically triggered procedures and the relative trigger temperature:
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smeg SCB 64 MPX 6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smeg SCB 64 MPX 6 in the language / languages: English as an attachment in your email.

The manual is 1,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Smeg SCB 64 MPX 6

Smeg SCB 64 MPX 6 User Manual - German - 20 pages

Smeg SCB 64 MPX 6 User Manual - Dutch - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info