336356
7
Zoom out
Zoom in
Previous page
1/16
Next page
Instructions for the installer
25
5. Adaptation to different types of gas
The appliance must not be built in and connected to the supply before the
following operations have been completed.
The cooker hob is preset for natural gas G20 (2H) at a pressure of 20 mbar.
If other types of gas are to be used, the nozzles must be replaced and the
primary air must be adjusted.
In order to replace the nozzles and adjust the burners, the hob top must be removed
as described below.
5.1 Removing the hob top
Remove all the burner components, following the numerical sequence in the figures
below:
Take out all the knobs by
pulling them upwards.
Lift all the burner
components off the hob.
1
Remove the couvette
from each burner by
unscrewing the two
screws.
2
Remove the hob
fastening screws, taking
care to remove only the
screws shown in the
figure to the right.
3
Having removed all the
components described
above, lift the hob top
upwards.
4
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smeg pva140 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smeg pva140 in the language / languages: English as an attachment in your email.

The manual is 2,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Smeg pva140

Smeg pva140 User Manual - German - 16 pages

Smeg pva140 User Manual - Dutch - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info