Manual Smeg kset 910 x (page 5 of 22) (English, German, Dutch, French, Italian)

133128

Zoom out

Zoom in

1/22

1.-

Speed Vitesse Velocidad Velocità

Snelheid

Absaugleistung

Ñêîðîñòü Velocidade

Hastighet

Low Moyenne Baja Bassa Laag Leistungsstufe Íèçêàÿ Baixa Låg

High Maximum Alta Alta Hoog Intensivstufe Âûñîêàÿ Alta Hög

Intensive Intensive Intensiva Intensa Intensief Intensiv Èíòåíñèâíàÿ Intensiva Intensiv

Light Lumière Luz Luce Licht Beleuchtung Îñâåùåíèå

Luz Lampa

Off

Allumé

Eteint

Encendido

Apagado

Accesa

Spenta

Aan

Uit

Ein

Aus

Âêëþ÷åíî

Îòêëþ÷åíî

Acesa

Desligada

På

2.-

Instructions for use

By pushing buttons shown in the figure 1,

you will be able to control the functions of the

extractor

Two achieve better extraction, we

recommend switching on the extractor a few

minutes before starting to cook (3 - 5

minutes) so that the air flow is continuous

and stable when extracting the fumes.

Likewise, keep the extractor switched on for

a few minutes when cooking is complete to

allow all fumes and odours to be expelled.

Cleaning and maintenance

Before carrying out any cleaning or

maintenance activities, ensure that the

extractor is disconnected from the mains.

To carry out cleaning and maintenance,

follow the Safety Instructions.

Filter cleaning

To remove the filters from their locations

release the anchoring points. Clean the filter,

either by putting it in the dishwasher (see

notes) or leaving it standing in hot water to

simplify the removal of grease or, if wished,

by means of special sprays (protecting the

non metallic parts). Once clean, leave it to

dry.

Notes: cleaning in the dishwasher with

aggressive detergents may darken the

surface of metallic parts, without this

affecting its gas retaining properties.

N.B. The filter must be cleaned at least once

a month depending on how often the

extractor is used. It must be remembered

that grease accumulates in the extractor

when cooking, whether it is switched on or

not.

Cleaning of the extractor body

The use of warm (40ºC approx.) soapy water

is recommended. A cloth moistened in this

water is used for cleaning the extractor,

paying special attention to the grids.

Afterwards, dry it using a lint-free cloth.

Note:

* Never use metallic scouring pads or

abrasive products that could damage the

surface.

* Do not use scrapers with metallic surfaces

such as knives, scissors etc.

Active charcoal filter

* To install the charcoal filters it is necessary

to firstly remove the metallic grease filters.

* In order to fix them it is necessary to

introduce the rear lips of each filter in the

holes provided for it in the security grid,

turning them upwards until its fixation by

clipping in the front part (Fig.6).

* The carbon filters last from three to six

months depending on the particular

conditions of use.

* The active carbon filters can neither be

washed nor regenerated. Once they are

exhausted, they must be changed.

* To replace worn out filters with new ones,

remove the old ones in the reverse order to

that of installation.

Changing Bulbs

* It is important that the mains are

disconnected, and ensure the bulbs that are

to be replaced are not hot.

* Remove the light lens to expose the

extractable lamps.

* The maximum bulbs power is 20W.

Technical Information (Fig.3)

Dimensions Width = 600//900 mm

Depth = 300 mm

Height = 353 mm

Electrical characteristics:

REFER TO RATING PLATE

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Smeg kset 910 x in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 4,16 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Smeg kset 910 x Manual

Product: