6
• Installing custom door panels
If you wish to install custom door panels, have the panels made
according to dimension drawings.
• Flat panels
Flat panels may be fitted in the frames (max thickness of panels:
6.35 mm). Flat panels less than 6.35 mm thick are not
recommended.
• Raised panels
A raised panel design can be created by screwing or gluing wood
panels to 6.35 mm backing or by using 16 mm stock with 6.35 mm
routed edges.
When installing the raised panels, leave 5.70 cm clearance between
the panels and the rear of the handle to allow holding it freely.
• Weight requirements for raised panel inserts
- The refrigerator door panel should not exceed 10 kg.
- Freezer door panels should not exceed 7 kg combined weight.
INSTALLING CUSTOM DOOR PANELS
Installing custom door panels