360157
4
Zoom out
Zoom in
Previous page
1/23
Next page
4
CONTENTS
1. Before starting the refrigerator.
2. How to use the appliance.
3. General advice on the use of the appli-
ance.
4. Maintenance.
5. Has the appliance stopped working?
6. Safety.
7. Technical data.
8. Installation.
9. Change of hinge side.
1. BEFORE STARTING THE
REFRIGERATOR
Check that the cabinet is undamaged.
Please report any transport damage
immediately to your dealer.
Wash the cabinet and inner lining with a
mild unscented detergent and wipe it dry.
Do not use abrasive scouring powder, steel
wool or similar.
Connection to the electricity supply: See
head (7) and (8).
2. HOW TO USE THE APPLIANCE
Operating panel: See fig. (1) page 21.
1. Lamp for the refrigerator.
2. Thermostat knob.
3. Indicator for the connection to the
electricity supply (green).
The thermostat knob is adjustable from 0
(stop) to 7 (coldest). Find the position of the
thermostat which gives you the desired
temperature. Start at position 4.
The refrigerator section
Never store hot foodstuffs in the cabinet and
remember always to wrap up the foodstuffs.
The evaporator of the refrigerator section is
automatically defrosted. The defrost water
is led to a tray on top of the compressor
where it evaporates.
The cooler section
The cooler section of the cabinet corre-
sponds to former times’ larder. The tem-
perature in the cooler section is higher than
in the refrigerator section as the two
sections are separated by a glass plate. The
temperature ranges between +8°C and
+12°C.
Temperature regulation of the cooler
section:
A glass shelf with slide damper separates the
refrigerator and cooler sections. This glass
shelf is situated in the middle of the appliance.
l Open slide damper = lower temperature.
l Closed slide damper = higher temperature.
3. GENERAL ADVICE ON THE USE
OF THE APPLIANCE
The shelves in the refrigerator section can be
moved, fig. (4) page 21.
The door rack and the butter- and cheese-
boxes are also movable, fig. (2) page 21.
If the cabinet is not to be used for more than
48 hours the doors should be left open to
avoid ill smells.
The appliance is equipped with a high-quality
skin condenser.
Therefore, a slight heating of the sidewalls is
quite normal.
In order to ensure the correct functioning
of the larder-fridge the glass shelves must
only be placed in shelf grooves with integrated
shelf stops.
Lighting
This appliance is equipped with a device which
causes the light to switch off if the door is open
/ left ajar for abnormally long time.
When the door has been closed for a couple of
minutes, the device is cut off and the light
switches on in normal way again.
Temperature regulation:
The slide damper above the crisper bin makes
it possible to regulate both the temperature
and the humidity in the crisper bins.
l Open slide damper reduces the tempera-
ture and the humidity.
l Closed slide damper increases the tem-
perature and the humidity.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smeg fa 40 x4 inox at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smeg fa 40 x4 inox in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 0,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info