Manual Smeg CMS4604NX (page 20 of 32) (English)

682751

Zoom out

Zoom in

1/32

Setting water hardness

1. Press (B2) to enter the menu;

2. Press (B10) or (B8) until the display (B) displays

WATER HARDNESS ;

3. To change the level selected, press the symbol itself until

the required level is displayed (Level 1 = soft water;

Level4=very hard water);

Press to go back to the homepage.

The machine is now reprogrammed with the new water hard-

ness setting.

WATER SOFTENER FILTER

Some models are tted with a water softener lter (C4): if your

model is not equipped with one, we recommend buying one

through an authorised customer service centre.

To use the lter correctly, follow the instructions below.

Installing the lter

1. Remove the lter (C4) from the packaging;

2. Press (B2) to enter the menu;

3. Press (B10) or (B8) until the display shows

WATER FILTER ;

4. Press ;

5. TURN THE DATE INDICATOR UNTIL THE NEXT 2 MONTHS ARE

DISPLAYED (g.43):

turn the date indicator disk until the next two months of

use are displayed. Press ;

Please note:

the lter lasts about two months if the appliance is used normal-

ly, if the coee machine is left unused with the lter installed, it

will last a maximum of 3 weeks.

1. FILL FILTER WITH WATER UNTIL IT’S COMPLETELY FILLED

(g.44): To activate the lter, run tap water through the

hole in the lter as shown in the gure until water comes

out of the openings at the side for more than a minute.

Press ;

2. Extract the tank (A12) from the appliance and ll with

water.

3. IMMERSE FILTER IN THE WATER TANK LETTING AIR BUBBLES

ESCAPE (g.45): Insert the lter in the water tank and im-

merse it completely for about ten seconds, sloping it and

pressing it lightly to enable the air bubbles to escape. Press

;

4. INSERT FILTER INTO ITS HOUSING AND PUSH IT DOWN TO

BOTTOM: Insert the lter in the lter housing (g.42) and

press as far as it will go. Press ;

5. INSERT WATER TANK : Close the tank with the lid (A15), then

replace the tank in the machine.

6. PLACE 0.5L CONTAINER UNDER OUTLET, PRESS OK TO FILL

FILTER (g.8): place the container under the hot water/

steam spout (C6) and press : delivery starts and

stops itself automatically.

The symbol appears on the display alongside the time to

indicate that the lter has been enabled. The coee machine can

now be used.

Replacing the lter

Replace the lter (C4) when the display (B) shows the message

REPLACE WATER FILTER, PRESS OK TO START : to replace

immediately, press and follow the instructions from

point 4.

To postpone replacing the lter to another time, press

on the display the symbol is a reminder that the lter

needs to be replaced.

To replace, proceed as follows:

1. Extract the water tank (A12) and exhausted lter;

2. Remove the new lter from the packaging;

3. Press (B2) to enter the menu;

4. Press (B10) or (B8) until the display shows

WATER FILTER ;

5. Press ;

6. The display shows REPLACE FILTER ;

7. Press ;

8. Follow the operations described in the previous paragraph

from point 5.

The lter is now active and the coee machine can be used.

Please note:

After two months (see date indicator) or when the appliance has

not been used for 3 weeks, you should replace the lter even if

the message has not yet been displayed.

Removing the lter

If you want to use the appliance without the lter (C4), you must

remove it and notify the appliance of its removal. Proceed as

follows:

1. Extract the water tank (A12) and exhausted lter;

2. Press (B2) to enter the menu;

3. Press (B10) or (B8) until the display shows

WATER FILTER ;

4. Press ;

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Smeg CMS4604NX in the language / languages: English as an attachment in your email.

The manual is 13,62 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Smeg CMS4604NX

Smeg CMS4604NX User Manual - German - 32 pages

Smeg CMS4604NX User Manual - Dutch - 32 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Smeg CMS4604NX Manual

Product: