590662
13
Zoom out
Zoom in
Previous page
1/26
Next page
13
3.2 Installing and programming accessories
3.2.1 Detector learning
TABLE: DETECTOR OPERATION DEPENDING ON THE STATION ARMING MODES
STATION ARMING MODE
PARAMETERS
TOTAL ARMING
PARTIAL ARMING
DISARMING
AREA 1*
DETECTOR ACTIVE
DETECTOR INACTIVE
AREA 2*
DETECTOR ACTIVE
DETECTOR INACTIVE
PANIC *
DETECTOR ACTIVE
* 10 detectors maximum per area
To program a detector:
- Enter 1234 (or your personal code), followed by *,
a long beep will be emitted and the STATUS LED
will flash.
- Push the learning button of the accessory to be
added (see adjacent drawing). When the signal is
received, a long beep will be emitted and the Area
1, 2 and PANIC LEDs will flash successively.
- Select the detector area. Push key 1 for area 1,
key 2 for area 2 and key 3 for PANIC area, a long
beep will be emitted.
Note: If an accessory is not properly detected by
the station, then the station will exit the learning
mode after 30 seconds and you will have to start
again the procedure.
3.2.2 Deleting detectors
The station cannot delete independently every
accessory. If you want to delete an accessory, you
must also delete all items present in the sane area. This means that you must reprogram the other accessories of
the deleted area.
To delete an area:
- Enter 1234 (or your personal code), followed by #, a long beep will be emitted and the STATUS LED will flash.
- Enter again 1234 (or your personal code) and select the area to be deleted. Push key 1 for area 1, key 2 for
area 2 and key 3 for PANIC area, a long beep will be emitted.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smartwares HA700 plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smartwares HA700 plus in the language / languages: English as an attachment in your email.

The manual is 1,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Smartwares HA700 plus

Smartwares HA700 plus User Manual - Dutch - 26 pages

Smartwares HA700 plus User Manual - Dutch, French - 52 pages

Smartwares HA700 plus Additional guide - All languages - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info