590662
11
Zoom out
Zoom in
Previous page
1/26
Next page
11
Programming the station
3.1.3 Programming the personal code
A personal code must be saved first by using the alarm station keys. You must choose this code, it will be used to
enable or disable the system. To change the code:
- Enter the factory code 1234.
- Then push the key 6, a long beep will be emitted and the STATUS LED will flash.
- Enter your 4 digit personal code.
- Push the key 6 to confirm the code change, a long beep will be emitted to confirm that the code has
changed.
To modify your code again, repeat the previous instructions, but replace the factory code by your personal code.
3.1.4 Setting the trigger mode
The station allows you to choose between 2 triggering modes in the case of an alarm.
Mode #1: Siren + transmitter Enter 1234 (or your personal code), followed by 0 and then 1.
In this mode, in the case of an alarm, the station rings and the transmitter will call the programmed numbers (for
programming the built-in transmitter, go to page 15).
Mode #2: Silent mode/transmitter alone
Enter 1234 (or your personal code), followed by 0 and then 2.
In this mode, in the case of an alarm, the station will not ring, but the transmitter will call the programmed numbers
(for programming the built-in transmitter, go to page 15).
NOTE: Mode 1 is default mode.
3.1.5 Entry delay
This mode allows selecting if the station integrates a 15 seconds entry delay, between detection and the alarm
triggering.
To enable/disable the entry delay:
- Enter the factory code 1234 (or your personal code).
- Then push the keys 0 and then 6, a long beep will be emitted and the STATUS LED will flash.
- Push the key 1 to enable OR the key 2 to disable the entry delay, a confirmation beep will be emitted.
The exit delay is fixed to 15 seconds and cannot be modified.
NOTE: The entry delay is disabled by default.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smartwares HA700 plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smartwares HA700 plus in the language / languages: English as an attachment in your email.

The manual is 1,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Smartwares HA700 plus

Smartwares HA700 plus User Manual - Dutch - 26 pages

Smartwares HA700 plus User Manual - Dutch, French - 52 pages

Smartwares HA700 plus Additional guide - All languages - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info