719674

Smartwares CIP-37186AT Manual

23
Zoom out
Zoom in
Previous page
1/46
Next page
CIP-37186AT manual
EN
Adding a new device
1. Connect the camera to the mains power, and wait for it start up. Open the SW360 app. After
logging in, tap the + button.
2. Plug in the camera with the USB adapter to power it up. Please wait for 30 seconds until the LED
on the camera starts flashing. Make sure that your camera is in close range (1m) of your mobile
device.
iOS
3a. Exit the app, and go to the
Wi-Fi settings on your mobile
device. The camera transmits its
own private wireless network.
3b. Connect to the Wi-Fi network
SSID that corresponds to your
Camera-ID. You can find the
camera-ID on the sticker on the
back of the camera. The
password is “11111111”. Wait for
your mobile device to connect to
the camera's Wi-Fi network.
3c. When you have connected
successfully to the camera, return
to the SW360 app.
Android
3. Select your camera-ID from the
list. You can find the camera-ID
on the sticker on the back of the
camera.
4. In the SW360 app, choose the SSID of the wireless network you ultimately want to connect the
camera to. Enter the corresponding password. Note: A 5Ghz Wi-Fi network is not supported.
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smartwares CIP-37186AT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smartwares CIP-37186AT in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 3,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info