687275
19
Zoom out
Zoom in
Previous page
1/68
Next page
Do not connect loads that require a stable electricity supply to the outlet for secure
power supply operation
Secure power supply operation must not be used for loads that require a stable electricity
supply. The power available during secure power supply operation depends on the solar
irradiation on the PV system. Therefore, power output can fluctuate considerably depending
on the weather or may not be available at all.
Do not connect loads to the outlet for secure power supply operation if they are
dependent on a stable electricity supply for reliable operation.
Procedure:
1. If no load is connected to the outlet, connect a load.
2. Turn the switch of the outlet to secure power supply operation.
3. Wait one minute.
The inverter commences secure power supply operation. As soon as the inverter supplies the
outlet with power, the green LED flashes (1.5s on and 0.5s off) and the message SPS-mode
active is shown in the display along with the amount of power being supplied from the
inverter to the outlet. In addition, the control light of the outlet for secure power supply
operation glows.
The green LED does not flash and no message that the secure power supply operation mode is
activated appears on the display or the control lamp of the outlet does not glow?
The output power of the PV system is too low. Irradiation on the PV system is probably too low
or the connected load requires more power than currently available.
Ensure that the outlet's switch is set to secure power supply operation.
If irradiation is too low, wait for it to increase.
Connect a load with lower power consumption to the outlet.
No voltage can be measured at the outlet?
Ensure that the outlet's switch is set to secure power supply operation.
Ensure that the switch, outlet and control light for secure power supply operation are
correctly connected.
4.3.2 Deactivating Secure Power Supply Operation
1. If necessary, disconnect the load from the outlet.
2. Turn the switch of the outlet to grid operation.
Grid operation is activated.
3. Switch on the circuit breaker of the PV system.
The inverter connects to the utility grid and starts feed-in operation.
4 Operation of the Inverter
SMA Solar Technology America LLC
User Manual 19SB30-77-1SP-US-40-BA-en-11
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SMA Sunny Boy 6.0-US at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SMA Sunny Boy 6.0-US in the language / languages: English as an attachment in your email.

The manual is 2,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info